BLE UART 프렌드 블루투스4.0 모듈
(Adafruit Bluefruit LE UART Friend
- Bluetooth Low Energy (BLE))
개요
- 진행하시는 프로젝트에 블루투스 BLE 기술을 추가하고 싶으신가요?
- 본 제품은 블루투스 4.0 BLE 모듈입니다. 하드웨어 혹은 소프트웨어 시리얼 포트에 연결하여 사용이 가능합니다.
- Bluefruit iOS App 혹은 Android App을 이용하여 스마트폰을 컨트롤러로 사용이 가능합니다.
- Nordic UART RX/TX 연결 프로파일을 사용하면 본 제품은 데이터 파이프 처럼 iOS와 안드로이드 장치간에 데이터를 전송할 수 있습니다.
- AT command set을 이용하여 모듈의 동작(RSSI, MAC, 칩온도, 배터리 전압 등등)을 제어 할 수 있습니다.
- d.
-
특징
- ARM Cortex M0 core running at 16MHz
- 256KB flash memory
- 32KB SRAM
- Transport: UART @ 9600 baud with HW flow control (CTS+RTS required)
- 5V-safe inputs (Arduino Uno friendly, etc.)
- On-board 3.3V voltage regulation
- Bootloader with support for safe OTA firmware updates
- Easy AT command set to get up and running quickly
- Dimensions: 21mm x 32mm x 5mm / 0.8" x 1.26" x 0.2"
- Weight: 3.4g
- You can do a lot more too!
- The Bluefruit can also act like an HID Keyboard (for devices that support BLE HID)
- Can become a BLE Heart Rate Monitor (a standard profile for BLE) - you just need to add the pulse-detection circuitry
- Turn it into a UriBeacon, the Google standard for Bluetooth LE beacons. Just power it and the 'Friend will bleep out a URL to any nearby devices with the UriBeacon app installed.
- Built in over-the-air bootloading capability so we can keep you updated with the hottest new firmware. Use any Android or iOS device to get updates and install them!