일렉트렛 마이크로폰 앰프 -MAX9814, 자동 게인 제어
(Electret Microphone Amplifier MAX9814 - Auto Gain Control)
개요
- 본 제품은 자동 게인 제어(AGC) 기능이 있는 일렉트렛 마이크로폰 앰프입니다.
- 20-20Khz의 마이크로폰이 납땜 조립 후 테스트되어 출고됩니다.
- 소리의 증폭을 위해서는 MAX9814를 사용하였습니다.
- 앰프에 있어 AGC가 의미하는 바는 큰 소리는 조용하게 만들어 앰프를 벗어나거나 짤리는 것을 피하고, 작은 소리는 증폭됩니다.
- 본 제품은 소리의 레벨이 변하는 곳에서 오디오를 검출하고 녹음하고자 할 경우에 사용하면 좋습니다. 엠프의 게인을 계속적으로 조절할 필요가 없습니다.
- MAX9814는 설정할 수 있는 몇몇 옵션이 있습니다. 기본 최대 게인은 60dB이지만 Gain 핀을 VCC나 그라운드에 연결하여 40dB나 50dB로 설정할 수 있습니다.
- 또한 Attack/Release 비율을 기본 1:4000에서 1:2000 혹은 1:500으로 변경할 사ㅜ 있습니다.
- 앰프의 출력은 1.25V DC bias상에서 최대 약 2Vpp이므로 3.3V 입력을 가진 ADC와 쉽게 사용할 수 있습니다.
- 라인입력을 보내고 싶다면 1-100uF blocking capcitor를 직렬로 사용하십시오(100uF가 좋습니다)
특징
- Supply Voltage: 2.7v-5.5v @ 3mA current
- Output: 2Vpp on 1.25V bias
- Frequency Response: 20Hz - 20KHz
- Programmable Attack and Release Ratio
- Automatic gain, selectable max from 40dB, 50dB or 60dB
- Low Input-Referred Noise Density of 30nV/
- Low THD: 0.04% (typ)
문서
- Microphone Amp Datasheet
- Electret Capsule Microphone Datasheet
- Adafruit AGC Electret Microphone Amplifier - MAX9814
- LED Masquerade Masks
- For audio-reactive projects, we suggest using an FFT driver library (such as the one in this library) which can take the audio input and 'translate' it into frequencies.
- If you just need to keep track of audio levels, see our sound-level meter tutorial for Arduino
- Our tutorial will get you started with using and testing the microphone amplifier
- and you can check out our general-purpose microphone amplifier tutorial for other project ideas and code.
연관제품
- 연관제품 1