라즈베리 파이 제로용 오토메이션 pHAT 쉴드
(Pimoroni Automation pHAT for Raspberry Pi Zero)
개요
- 본 제품은 라즈베리 파이 제로용 오토메이션 pHAT 보드입니다.
- 라즈베리(40핀 헤더를 가진 버전)와 결합하여 릴레이, 아날로그 채널, powered output, buffered input (모두 24V tolerant)를 사용할 수 있게 디자인된 보드입니다.
- 산업용 제품과 연결하기 좋게 24V 장치들과 인터페이스가 가능합니다.
특징
- 1 x 24V @ 2A relay (NC and NO terminals)
- 3 x 12-bit ADC @ 0-24V
- 3 x 24V tolerant buffered inputs
- 3 x 24V tolerant sinking outputs
- 3.5mm screw terminals
- SPI pins broken out
- Compatible with Raspberry Pi 3, 2, B+, A+, and Zero
- Python library
- Female header and broken out pins require soldering
문서
-
Software
Pimoroni has made a super-simple to use Python library to take advantage of Automation pHAT's multitudinous functions, with examples to get you started. In fact, Automation pHAT uses the same library as Automation HAT, and it uses the presence (or absence) of the SN3218 LED driver chip to autodetect which board (HAT or pHAT) is being used. Nifty!
Their input, output and relay examples show you how to read the analog and digital inputs, switch the outputs on and off, and control the relay.
Notes
- Loads for the buffered outputs should be switched on the ground side, i.e. 12/24V (from supply) -> load -> output terminal -> ground (from supply)
- The relay can tolerate up to 2A each and should be switched on the high side
Unassembled board dimensions: 65.0mm x 30.0mm x 10.0mm / 2.6" x 1.2" x 0.4"
Unassembled board weight: 8.8g / 0.3oz
For product support, replacement parts and warranty for Pimoroni products visit the Pimoroni forum or contact Pimoroni directly.
연관제품
- 연관제품 1