베리GPS -라즈베리 파이용 GPS 모듈
(BerryGPS -GPS for Raspberry Pi, MT3337)
개요
- 본 제품은 라즈베리 파이와 사용이 가능한 BerryGPS 모듈입니다.
- 라즈베리 파이 제로 사이즈의 크기를 가지고 있으며, 제로뿐 아니라 모든 버전의 라즈베리 파이와 사용이 가능합니다.
- Antenova사의 M10478-A2( MT3337-E chip)을 사용하여 22개의 위성을 추적할 수 있습니다.
- 모듈에는 안테나가 내장되어 있습니다.
- 슈퍼캐패시터가 배터리 백업 램의 GPS 데이터를 4시간동안 유지시켜 주어 모듈에 전원이 반복해서 들어오는 상황시에 빠른 acqusition이 가능하게 하여 줍니다.
- Fix가 획득되면 Fix LED가 초당 한번씩 깜빡입니다. Fix 신호는 출력 핀에도 나타납니다.
- BerryGPS에는 PPS(Pulse Per Second) 기능이 포함되어 있습니다. 펄스시에 깜빡이는 LED와 출력 핀은 마이크로컨트롤러에서 시간을 동기화할시에 사용이 가능합니다.
- Standby Pin은 GPS 모듈을 standby mode로 진입시킵니다.
- 전류소비를 절약하기 위한 periodic mode가 있어 Fix 데이터를 유지하기 위한 짧은 시간에만 모듈이 wakeup 되게 지원합니다.
- 보드에는 UFL 커넥터가 있어 외장 GPS 안테나를 연결할 수 있습니다.
특징
-
BerryGPS is compatible will all models of Raspberry Pi, including Pi 2, Pi 3 and Zero.
-
Dimensions; 65 mm x 30 mm
Weight = 5gm
GPS Module MT3337
- Low current consumption, <200uA when using Periodic mode.
- Antenova M10478-A2 ( MT3337-E chip) GPS module
- 3.3v supply
- NMEA 0183
- UART 4800/9600/38400/115200 bps
- Channels – 210 PRN / 66 Acquisition / 22 Tracking
- Max update rate 5 Hz
- Horizontal position accuracy <2.5m CEP
- Acquisition sensitivity -148dBm
- Tracking sensitivity -165dBm
- Hot start <1s
- Warm start <25s
- Cold start <35s
- Orbit prediction
- 1PPS Sync
- Fix LED
- PPS LED
- Internal antenna
- Connector for external antenna
- SuperCap to help store ephemeris data.
BerryGPS should only be powered with a 3.3v power supply.
BerryGPS comes with;
- BerryGPS PCB
- 1 x Female header
- 4 x Nylon standoffs, nuts and screws
Raspberry Pi and Antenna are not included.
Some very basic soldering is required to solder on the female header.