Qwiic I2C GPS 모듈 -Titan X1
(Qwiic GPS - Titan X1)
개요
- 알림: 단종되어 SparkFun GPS Breakout - XA1110 (Qwiic) 으로 출고됩니다.
- 본 제품은 I2C 인터페이스를 가진 GPS+GLONASS 모듈입니다.
- GTOP사의 Titan X1을 장착하였으며, I2C 포트와 시리얼을 동시에 지원하는 펌웨어가 올려져 있는 미디어텍 MT3333 칩셋을 사용한 컴팩트한 모듈입니다.
- 또한 RTC 배터리를 장착하여 warm-start 기능(5 seconds to first fix)을 지원합니다.
- UFL 커넥터가 장착되어 있어 UFL 케이블을 이용하여 외부 안테나를 연결할 수 있습니다.
- I2C 인터페이스를 이용하는 라이브러리가 있습니다.
특징
- Voltage: 3.3V
- Current: 25mA (typical)
- Hot/Warm/Cold Start: 1/5/15 seconds
- Update rate: 1Hz (default) configurable from 0.1Hz to 10Hz
- I2C Interface: 100kHz and 400kHz supported
- UART: 9600bps (default) configurable from 4800bps to 115200bps
- Both UART and I2C are 3.3V logic compatible
- Configurable status LED indicating fix with Pulse-Per-Second accuracy of +/-10ns
- Position Accuracy: <3.0m, <2.5m with SBAS enabled
- Supports 99 simultaneous satellites during search and 33 during tracking
- Sensitivity: -148dBm Acquisition, -165dBm Tracking
- Max Altitude: 80km (the mesosphere) using the example configuration sketch to enable high altitude balloon mode.
- Supports both GPS and GLONASS constellations for better accuracy
- SBAS/DGPS compatible
- On-board 5.5mAh RTC battery will maintain ephemeris data and enable warm-start for over 15 days without power
- Common U.FL powered connector for external antennas with U.FL to SMA cable
- Module auto-selects between 12x12mm patch antenna or external active antenna at power up
문서
- Schematic
- Eagle Files
- Example sketches demonstrating I2C read and configuration
- Arduino Library
- GPS Module Titan X1 Datasheet
- NMEA over I2C Application Note
- MediaTek Protocol and Packet Manual - Used to configure module (posted with permission)
- Checkout the GitHub repo for the latest files