DRV8701 DC 모터 드라이버
(DC MOTOR 5 click)
개요
- 본 제품은 DRV8701 모터 드라이버입니다.
- 5.9V-45V의 공급전압으로 동작이 가능하며, 저전압, 과전류, 쇼트, 과열 등에 대해 보호 기능을 가지고 있습니다.
- 모터의 속도와 방향을 두개의 PWM 입력 신호로 제어할 수 있습니다.
특징
-
DRV8701 driver features
The DRV8701 is an H-bridge gate driver (also called a pre-driver or controller). The device integrates FET gate drivers in order to control four external NMOS FETs. The device can be powered with a supply voltage between 5.9V and 45V.
Internal protection functions are provided: under-voltage lockout, charge pump faults, overcurrent shutdown, short-circuit protection, pre-driver faults, and overtemperature.
How the click works
The motor's velocity and direction can be adjusted with two PWM input signal's.
Specifications
Type DC Applications Industrial brushed-DC motors, robotics, home automation, etc. On-board modules DRV8701 Brushed DC Motor Full-Bridge Gate Driver Key Features supply voltage between 5.9V and 45V Interface GPIO Click board size M (42.9 x 25.4 mm) Pinout diagram
This table shows how the pinout on DC MOTOR 5 click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
Buttons and LEDs
Designator Name Type Description LD1 PWR LED Power Indication LED TB1 VM CD Voltage input connector TB2 Out_M CD Motor connector Maximum ratings
Description Min Typ Max Unit Supply VOltage 5.9 45 V Source Current 6 150 mA Sink Current 12.5 300 mA Applied PWM signal 100 kHz Operating ambient temperature -40 125 ℃
문서
연관제품
- 연관제품 1