라즈베리용 전원 On/Off 애드온 보드
(Pimoroni OnOff SHIM for Raspberry Pi)
개요
- 본 제품은 라즈베리 파이와 사용이 가능한 On-Off SHIM(Shove Hardware in the Middle) 애드온 보드입니다.
- GPIO핀에 연결하여 사용이 가능하며, micro usb 를 통해 전원을 공급하고 버튼을 눌러 전원을 켜고 셧다운(소프트웨어 인스톨 필요 -문서섹션 참조)할 수 있습니다.
특징
- Super-small SHIM-format board
- 0.8mm thick PCB
- Can be used with HATs and pHATs
- Corner-mounted push button for on/off
- Micro-B connector for power supply
- Red status LED
- Optional breakout pins to connect an external momentary button
- 2x6 female header included
- Supports up to 2.5A power supply
- Software daemon to shutdown cleanly
- Requires soldering
문서
-
Software
Pimoroni put together a one-line-installer to install the clean shutdown daemon. It watches the state of BCM pin 17 and, when pulled low (pressed), it initiates a clean shutdown. Last thing, just before your Pi shuts down, BCM pin 4 is pulled low to completely cut power to your Pi.
To install the software, open a terminal and type curl https://get.pimoroni.com/onoffshim | bash to run the one-line-installer.
For product support, replacement parts and warranty for Pimoroni products visit the Pimoroni forum or contact Pimoroni directly.
Product Dimensions: 33.4mm x 16.1mm x 3.6mm / 1.3" x 0.6" x 0.1"
Product Weight: 1.3g / 0.0oz
연관제품
- 연관제품 1