아날로그 용해성 고용물질 측정 센서
(Gravity: Analog TDS Sensor/Meter for Arduino)
개요
- 본 제품은 아두이노 호환 TDS 센서/미터 키트입니다.
- 수질이 얼마나 깨끗한지 알려주는 물의 TDS(용해성 고용물질 농도)값을 측정을 할 수 있습니다.
- TDS(Total Dissolved Solids)는 1리터의 물에 얼마나 많은 밀리그램의 용해성 고체가 포함되어 있는지를 표현하는 용어로 TDS 값이 높을 수록 더 많은 고용물질이 있다는 의미이며, 낮을수록 물이 깨끗하다는 의미입니다.
(Cited from Google)- 본 제품은 3.3-5.5V로 동작하며, 0-2.3V 아날로그 전압 출력을 가지고 있습니다.
- 모듈과 TDS 프로브가 포함되어 있습니다.
Attention:
1.The probe can not be used in water above 55 degrees centigrade.
2.The probe can not be left too close to the edge of the container, otherwise it will affect the reading.
3.The head and the cable of the probe are waterproof, but the connector and the signal transmitter board are not waterproof. Please be careful.
특징
- Wide Voltage Input: 3.3~5.5V
- Good Compatibility Output: 0~2.3V analog signal output, compatible with 5V or 3.3V controller
- AC Excitation Source: effectively prevent probe from polarization
- Waterproof Probe
- Easy to Use: Arduino compatible, simple connection, plug and play without soldering
- Signal Transmitter Board
- Input Voltage: 3.3 ~ 5.5V
- Output Voltage: 0 ~ 2.3V
- Working Current: 3 ~ 6mA
- TDS Measurement Range: 0 ~ 1000ppm
- TDS Measurement Accuracy: ± 10% F.S. (25 ℃)
- Module Size: 42 * 32mm
- Module Interface: PH2.0-3P
- Electrode Interface: XH2.54-2P
TDS probe
- Number of Needle: 2
- Total Length: 83cm
- Connection Interface: XH2.54-2P
- Color: Black
- Other: Waterproof Probe
- SHIPPING LIST
- Gravity: Analog TDS Sensor/Meter for Arduinox1
- Waterproof TDS Probex1
- Gravity-3Pin Analog Sensor Cablex1