X9C103S 디지털 포텐셔미터
(Digital Potentiometer -X9C103S)
개요
- 본 제품은 X9C103S 디지털 포텐셔미터 모듈입니다.
- 디지털로 제어되는 포텐셔미터로 3V-5V로 동작하며 0-10K 저항값을 가집니다.
- 알림: 핀헤더는 포함되어 있지 않습니다.
특징
- Operating Voltage: 3V - 5V
- Chipset: X9C103S
- Board Dimensions: 27mm x 13mm
- Center Tap Resistance Range: 0 to 10K Ohm
- Digitally controlled potentiometer
- Consists of a resistor array, wiper switches, a control section, and non-volatile memory
- Wiper position is controlled by a three-wire interface
- Contains resistor array composed of 99 resistive elements and a wiper switching network to achieve variable resistance
- Between each element and at either end are tap points accessible to the wiper terminal
- Position of the wiper element is controlled by the CS, U/D, and INC inputs
- Position of the wiper can be stored in non-volatile memory and then be recalled upon a subsequent power-up operation
- Can be used as a three-terminal potentiometer or as a two-terminal variable resistor