4채널 I2C Qwiic 쿼드 릴레이 -5A
(SparkFun Qwiic Quad Relay)
개요
- 본 제품은 4채널 I2C 릴레이 모듈입니다.
- 아두이노에서 I2C 인터페이스를 이용하여 4개의 릴레이를 제어할 수 있습니다.
- 채널당 5A(250VAC 혹은 30VDC)를 지원합니다.
- 각각의 채널은 LED를 가지고 있고, 스크류터미널 블럭이 있어 쉽게 연결이 가능합니다.
- 릴레이에는 ATtiny84 MCU가 장착되어 있어 4개의 릴레이를 제어하는데 사용합니다.
- ATtiny84A의 I2C 주소는 소프트웨어로 설정이 가능하여, 이론상으로는 100여개가 넘는 릴레이 장착이 가능합니다.
- 전원잭이 있어 전원 어답터 연결이 가능합니다. 7-15V 전원어답터를 사용가능하며, 5V 어답터를 사용하고자 한다면 보드 밑면의 점퍼를 설정하여 주어야 합니다. (레귤레이터 발열 이슈가 있는 경우 5V 어답터 사용 권장)
특징
- Four JZC-11F Relays
- 5A at 250VAC, 30VDC
- Each relay has its own colored LED and silk labels for easy identification.
- Safey Features
- Ground pour isolated from relays.
- Air gap around common pin on the relays.
- Large trace width on relay pins far exceeding the peak 5A current.
- ATtiny84A
- I2C commands for toggling individual relays or all the relays at once.
- I2C commands for turning all relays off or on.
- Two I2C addresses: 0x6D, 0x6C
- I2C address is software configurable.
- All commands are listed in the example code.
- Screw Terminals
- 26-14 Gauge AWG wire
- Power
- Max Current Draw ~250mA
- Dropout Voltage is ~7.4V