스파크펀 레드보드 터보 -SAM21, 아두이노, CircuitPython, MakeCode
(SparkFun RedBoard Turbo - SAMD21 Development Board)
개요
- 본 제품은 32비트 ARM Cortex M0+ ATSAMD21G18 마이크로컨트롤러를 탑재한 아두이노 레드보드 터보입니다.
- 기존의 아두이노 레드보드보다 높은 성능을 자랑하는 보드입니다.
- 프로그래밍을 위한 USB 인터페이스, Qwiic 커넥터, RTC 크리스탈, WS2812 RGB LED, 600mA 3.3V 레귤레이터 등을 장착하고 있습니다.
- 리포 배터리를 충전할 수 있는 회로를 탑재하였습니다.
- 또한 본 제품은 플래쉬 드라이브와 같은 Mass Stroage Class (MSC)로 플래쉬 할 수 도 있습니다. (UF2 부트로더)
- UF2 부트로더 때문에 PC에 USB 저장장치로 나타나게 됩니다. 아두이노 IDE를 사용할수도 있지만 CircuitPython이나 MakeCode또한 사용할 수 있게 됩니다.
특징
- ATSAMD21G18 32-bit/48MHz ARM Cortex-M0+
- 4MB Flash Memory
- 32KB SRAM
- 32KB of EEPROM (emulated in Flash)
- 26 GPIO Count
- 14 ADC Channels at 12-bit Resolution
- Analog-to-Digital and Digital-to-Analog Converters (ADC & DAC)
- Vin: 4.2V-6.0V for charger - otherwise 3.5V-6.0V
- VBATT: 3.7V Lipo
- VCC: 600mA @3.3V
- Arduino R3 Layout
- Integrated USB Controller
- RGB LED
- UF2 Bootloader
- Qwiic Connector
- Note: The barrel jack connection on the RedBoard Turbo has a lower input voltage than most Arduino development boards. Make sure that you are using a power supply below 6V. Please be aware that the RedBoard Turbo is also a 3.3V device and not a 5V one like the original RedBoard.
문서
- Schematic
- Eagle Files
- Hookup Guide
- Datasheet (10MB PDF)
- SAMD Arduino Core
- GitHub