2 x 100W + 200W 2.1 채널 블루투스 오디오 앰프 보드 - TSA7500B(Apt-X)
(2 x 100W + 200W 2.1 Channels Bluetooth Audio
Amplifier Board - TSA7500B(Apt-X))
개요
- 본 제품은 TSA7500 2 x 100W + 200W 2.1 채널 블루투스 오디오 앰프 보드입니다.
- Apt-X를 지원하는 AudioB Pro 블루투스 모듈을 장착하고 있습니다.
- TPA3221을 기반으로 완벽한 Class D 아키텍쳐를 가지고 있으며, 100W 출력 파워의 2채널과 나머지 한 채널은 200W의 출력을 가집니다.
- 모든 채널은 동시에 출력을 연속적으로 내보낼수 있습니다.
- DC12-30V 전원으로 동작하며, 4오옴이나 8오옴 패시브 스피커와 사용이 가능합니다.
- 판매중인 TSA1000, TSA1010, TSA1020 과 같은 오디오 볼륨 컨트롤 보드와 같이 연결하여 사용이 가능합니다.
- 2.1 채널로 서브우퍼 채널은 200W 모노 출력입니다.
- 스마트폰과 같은 블루투스 장치와 연결하여 사용이 가능합니다.
- TSA7500으로 나타나며, PIN은 필요없습니다.
- Apt-X 와 TWS가 지원되어 오디오를 2쌍의 앰프보드에 동시에 전송할 수 있습니다.
특징
-
Specification:
Specifications typical @ +25℃, Powered by 24V DC, unless otherwise noted. Specifications subject to change without notice.
Parameter Condition Min Typ Max Supply Voltage (VDC)
- 10 24 26 Power output per channel RL= 3Ω, 10% THD+N 112W RL= 4Ω, 10% THD+N 105W RL= 3Ω, 1% THD+N 100W RL= 4Ω, 10% THD+N 88W 200W channel: RL= 2Ω, 1% THD+N 208W THD+N 1W 0.02% SNR A-weighted,Gain= 18 dB 108dB DNR A-weighted,Gain= 18 dB 109dB Minimum Load Impedance
3Ω
4Ω
Gain 18dB 24dB 34dB Efficiency 100W @ 4Ohm 90% Input Impedance
18dB 48KΩ 24dB 24KΩ 30dB 12KΩ 34dB 7.7KΩ - Size: 15cm x 9cm x 2.5cm
- aptX, aptX Low Latency, SBC and AAC
- Bluetooth 4.2
- Bluetooth audio volume control port(BVC)
- Aux in/LIne in auto detect
- 2.1 channels
- Working voltage: DC12V-30V
- Over/under voltage protection
- Over current protection
- Over temperature protection
- TSA7500 can auto detect the Aux in/Line in Audio input. Bluetooth Audio source has higher priority. When Bluetooth audio is paused or bluetooth is disconnected. The amplifier will output the Aux in/Line in audio.
- There have an audio connnector can connect with an exteral DSP to set the subwoofer audio tones.
- BVC Port: BVC port can be connected with our Audio volume controller to control the Bluetooth audio volume.
-
Connect an external potentiometer control the subwoofer volume separately
TSA7500 can auto detect the Aux in/Line in Audio input. Bluetooth Audio source has higher priority. When Bluetooth audio is paused or bluetooth is disconnected. The Amplifier will output the Aux in/Line in audio.
TSA7500 + TSA1000, Both Aux in and Bluetooth audio volume can be controlled through BVC port
2 boards work in TWS mode
*User must remove the slave board Aux in Enable jumper before pairing 2 boards
- S1 - Long press 3s into pairing mode. Long press 6s clear the pairing info.
- S1+S2 - Long press 1s into TWS slave mode.
- S1+S3 - Long press 1s into TWS master mode.
- S2+S3 - Long press 1s disconnect TWS connection.
문서
- How to change the BT name
- How to enable BT password
- How to change Bluetooth audio gains
- TSA7500B Bluetooth module PSR file