AudioB I2S 블루투스 디지털 오디오 리시버 모듈 -UFL
(AudioB I2S Bluetooth Digital Audio Receiver Module - U.FL)
개요
- 본 제품은 AudioB I2S 블루투스 오디오 리시버입니다.
- 블루투스 오디오 앰프를 디자인할때 사용이 가능한 제품으로 블루투스 4.2 스테레오 오디오 리시버 모듈입니다.
- CSRA64215 기반의 제품으로 I2S 출력, 음악 resampling 주파수 48Khz, Apt-X를 지원합니다.
- 2mm 피치의 2x10 핀을 통해 인터페이스 접근이 가능합니다.
- UFL 커넥터를 가진 제품으로 2.4Ghz 외부 안테나와 연결하여 사용이 가능합니다.
특징
- Bluetooth 4.2
- I2S digital output
- Sampling Rate: 48KHz
- Bit per Sample: 16 bit
- Left Justified
- Justified Data 1 bit delay
- Apt-X supported
- Low power consumption: 5mA@5V
- HFP V1.6
- HSP V1.2
- A2DP V1.2
- AVRCP v1.4
- Support for smartphone application(APPs)
-
The module PIN7,8,9,10 are I2S output pins, I2S voltage 1.8V.
- 7 - GND
- 8 - BCK I2S synchronous data clock, It's a 2.304MHz square wave signal.
- 9 - SD I2S synchronous data output.
- 10 - LRCK I2S word select, 48KHz. 1 - Left channel data, 0 - Right channel data.
- Setting switch: We set to I2S in normal state. Set to SPI when you need programming the module.
Note: You need set the on board switch to SPI when you programming the module
Note:
- Quick press S2 to switch to the previous song, long press to reduce the volume
- Quick press S3 to switch to the next song, long press to increase the volume
- Press S1 to play or pause
- if there have audio output, MUTE pin will be high level, otherwise, will be low level.