아두이노용 EasyVR 3 플러스 쉴드 - 음성인식 쉴드
(EasyVR 3 Plus Shield for Arduino)
개요
- 본 제품은 아두이노용 음성인식 쉴드 EasyVR 3 플러스 쉴드입니다.
- 아두이노와 결합하여 사용할 수 있는 음성인식 쉴드로 EasyVR 3 Plus 모듈과 아두이노 쉴드 아답터, 마이크로폰, 헤더가 포함된 제품입니다.
- 다재다능한 음성인식 쉴드로 다양한 어플리케이션에 사용이 될수 있으며, 3.3V/5V 로직으로 동작하는 UART 인터펭스 시스템과 사용이 가능합니다.
특징
- include
- EasyVR 3 Plus Module
- EasyVR Shield 3
- Wired Microphone
- Speaker cable (Speaker not included)
- Header Set
- Up to 256 user-defined Speaker Dependent (SD) or Speaker Verification (SV) commands, that can be trained in ANY language, divided into maximum 16 groups (up to 32 SD or 5 SV commands each).
- A selection of 26 built-in Speaker Independent (SI) commands for ready-to-run basic controls, in the following languages:
- US English
- French
- German
- Italian
- Japanese
- Spanish
- Other SI commands freely downloadable from the Fortebit website (downloads section).
- SonicNet™ technology for wireless communications between modules or any other sound source (Audio CD, DVD, MP3 Player).
- Up to around 21 minutes of pre-recorded sounds or speech.
- Up to about 137 seconds of live message recording and playback.
- Real-time Lip-sync capability.
- DTMF tone generation.
- Differential audio output that directly supports 8Ω speakers.
- Easy-to-use Graphical User Interface to program Voice Commands and audio.
- Standard UART interface (powered at 3.3V - 5V).
- Simple and robust documented serial protocol to access and program through the host board.
- Six General purpose I/O lines that can be controlled via UART commands.
- With the optional Quick T2SI Lite license, up to 28 custom Speaker Independent (SI) command vocabularies, with up to 12 commands each, for a total of 336 possible commands in the following languages:
- US English
- British English
- French
- German
- Italian
- Japanese
- Korean
- Mandarin
- Spanish
- Compatible with Arduino boards that have the 1.0 Shield interface (UNO R3) including, but not limited to:
- Arduino Zero
- Arduino Uno
- Arduino Mega
- Arduino Leonardo
- Arduino Due
- Supports 5V and 3.3V main boards through the IOREF pin (defaults to 5V if this pin is absent)
- Supports direct connection to the PC on main boards with a separate USB/Serial chip and a special software-driven "bridge mode" on boards with only native USB interface, for easy access and configuration with the EasyVR Commander
- Enables different modes of serial connection and also flash updates to the embedded EasyVR module (through the Mode Jumper)
- Supports remapping of serial pins used by the Shield (in SW mode)
- Provides a 3.5mm audio output jack suitable for headphones or as a line out
문서
- User Manual
- EasyVR Commander (35MB File)
- Arduino Library
- Downloads Page