그루브 쉴드 피더윙 -파티클 메쉬, 피더보드용
(Grove Shield FeatherWing for Particle Mesh and all Feathers)
개요
- 본 제품은 Particle Mesh 및 피더보드용 Grove Shield 피더윙 보드입니다.
- particle mesh 및 피더보드를 결합하여 seeedstudio사의 다양한 그루브 센서와 사용할 수 있게 하여줍니다.
- 8개의 그루브 커넥터가 있습니다.
특징
- 8 Grove connectors
- 3.3V compatible
- User Guide
-
Product Dimensions: 57.6mm x 53.0mm x 11.8mm / 2.3" x 2.1" x 0.5"
Product Weight: 18.7g / 0.7oz
-
You get 8 Grove connectors on this shield, including:
- 3 Grove analog connectors, 2 analog pins each, 6 analog pins in total
- 2 Grove digital connectors, 2 digital pins each, 4 digital pins in total;
- 2 Grove I2C connectors (these will also fit our 4-pin STEMMA connectors)
- 1 Grove UART connector
Please note that this board was designed for Particle Mesh, so the pin numbers next to each Grove connector match the pin numbering used on Particle. If you're using Particle boards, you're good to go! If you're using other Feather boards, and only using the UART (RX/TX), I2C (SDA/SCL) or analog pins (A0-A5), the numbering will match up just fine since that's the same on pretty much all Feather boards (some, like the ESP8266, don't have A1-A5 pins). But, for the digital connectors, you'll need to look and match the pin numbers from the Feather you've got to a Particle Mesh board since many Feathers have different digital pin numbering. Or use a multimeter to verify connectivity. It's not a big deal as long as you know to watch out for it, and it only affects the 2 digital connectors.