완전히 절연된 I2C 스위치 HT0740 모듈 -40V@10A
(HT0740 40V / 10A Switch Breakout)
개요
- 본 제품은 완전히 절연된 I2C 스위치 HT0740 모듈입니다.
- 최대 40V@10A까지의 부하를 스위칭 할 수 있는 제품입니다.
- 스크류 터미널 블럭에 스위칭할 부하를 연결할 수 있으며, 상태 표시 LED를 통해 상태 확인이 가능합니다.
- I2C 주소 설정을 통해 한번에 최대 4개 모듈까지 사용이 가능합니다.
- 3.3V/5V 시스템과 사용이 가능합니다.
- Break Garden 모듈을 사용이 가능합니다.
특징
- HT0740 MOSFET driver chip (datasheet)
- TCA9554A I2C expander chip (datasheet)
- TPN2R304PL MOSFET (datasheet)
- Bright white status LED
- Can switch up to 40V / 10A (DC only)
- Fully-isolated
- Screw terminals
- 3.3V or 5V compatible
- I2C interface (four addresses: 0x38-0x3B)
- Reverse polarity protection (on the Breakout Garden side only)
- Raspberry Pi-compatible pinout (pins 1, 3, 5, 7, 9)
- Compatible with all 40-pin Raspberry Pi models
- Compatible with Arduino
- Python library
문서
-
Software
We've put together a Python library that you can use with your HT0740 Breakout.
Our HT0740 Python library allows you to switch and toggle the switch on and off, check the state of the switch, and control the status LED, as well as controlling several switches at once, each with a different I2C address.
Notes
- DC voltage only. Do not use to switch loads higher than 40V / 10A. Despite the MOSFET part being rated for higher voltages, the screw terminals are not suitable for this.
- Not PWM-able
- Dimensions: 23x21x12mm