0.96 inch SPI 컬러 LCD 모듈 -160x80
(0.96 inch SPI Colour LCD (160x80) Breakout)
개요
- 본 제품은 0.96인치 SPI 컬러 LCD 모듈입니다.
- 2:1의 와이드스크린 비율을 가지고 있으며, IPS 디스플레이로 넓은 화각을 가지고 있습니다.
- 라즈베리파이 및 아두이노와 사용이 가능합니다.
- 최대 50fps까지 동작을 시킬수 있습니다.
특징
- 0.96" colour LCD (160x80 pixels)
- SPI interface
- 3.3V or 5V compatible
- Reverse polarity protection
- Requires soldering
- Compatible with all models of Raspberry Pi and Arduino
- Python library
-
Display specifications
- 160x80 pixels (~190 PPI)
- 10.8x21.7mm active area
- 400cd/m2 luminance
- 800:1 contrast ratio
- 160° viewing angle (horizontal and vertical)
- ST7735S driver chip
문서
-
Software
We've adapted an existing Python library to drive this display. The library makes it straightforward to display images, text or graphics, and even display animated GIFs! There's a one-line-installer to get the library all set up for you. Just open a terminal and type: curl https://get.pimoroni.com/st7735 | bash
Connecting to your Raspberry Pi
Our library is set up to use SPI 0 on the Pi (BCM 8 for CS, BCM 11 for SCK, and BCM 10 for MOSI), BCM 9 for DC, and BCM 18 for the backlight.
Here's which pins to connect between your 0.96" LCD Breakout and your Pi's GPIO (note that it's BCM pin numbering):
- 3-5V to any 5V or 3V pin
- CS to BCM 8
- SCK to BCM 11
- MOSI to BCM 10
- DC to BCM 9
- BL to BCM 18
- GND to any ground pin
You can of course use other pins with your LCD Breakout, but you'll have to change them accordingly when you instantiate the display in your code.
Notes
Dimensions: 29.1x25.9x5.4mm