Sipeed Tang Nano FPGA 보드 -GW1N-1 FPGA
(Sipeed Tang Nano FPGA Board Powered by GW1N-1 FPGA)
개요
- 본 제품은 FPGA보드치고 매우 저렴한 GW1N-1-LV 칩 기반의 GW1N-1 FPGA 보드입니다.
- GW1N-1칩은 4개 주소의 RAM과 864 플립플롭을 포함한 1152 LUT4를 가지고 있습니다.
- SRAM은 72K입니다. 크기 제한으로 인해 이 보드는 DSP 모듈을 가지고 있지 않으며, 복잡한 연산을 수행할 수 없습니다.
- 풍부한 I/O핀을 가지고 있으며, 전원 공급과 코드 다운로드를 하기 위한 USB type C 인터페이스를 가지고 있습니다.
- FPGA보드에 JTAG 다운로더가 있어 별도의 다운로더가 필요 없습니다.
- 40핀 FPC LCD 커넥터가 장착되어 LCD(5인치 TFT LCD)를 연결할 수 있습니다.
특징
- FPGA chip GWIN-1-LV: LUT4 1152, Flip-Flop 864, BSRAM(bits) 72K, USER Flash(bits) 96K, PLLs+DLLs 1+0, Core voltage 1.2V
- Download method: Simply plug in the USB cable and download it via the onboard downloader.
- Power circuit: Each Bank occupies a separate LDO power chip (except BANK0/3). Adjust the I/O level of BANK1 and BANK2 by replacing the LDO chip by yourself.
- 40P FPC LCD carrier: Standard 40 RGB LCD interface. On-board screen backlight driver circuit(default normally open, EN pin can be connected to FPGA)
- I/O: 34 I/O ports and multiple power pins on both sides. Both sides of the pins can be directly inserted into the breadboard.
- Onboard PSRAM chip: Capacity: 64Mbits Voltage: 3.3V
- Power supply and download interface: USB-Type-C interface
- RGB LED: Onboard small size RGB LED
- Button: 2 3X4mm buttons onboard
- Crystal oscillator: Onboard 24Mhz crystal oscillator(started by CH552)
- External supply voltage demand: 5.0V±0.2V
- External supply current demand: >400mA@5V
- Temperature rise: <30K
- Range of working temperature: −30°C~50°C
-
If you would like to use more FPGA boards for further study or work, we recommend the following board.