정품 아두이노 윤 R2
(ARDUINO YUN REV 2)
개요
- 본 제품은 아두이노 윤 보드입니다.
- 리눅스 기반 시스템과 아두이노의 단순성을 결합시킨 제품으로 WiFi나 이더넷을 쉽게 연결할 수 있습니다. (Web panel 및 ''YunFirstConfig'' sketch 이용)
- 웹 패널에서 쉴드의 설정을 관리할 수 있고 스케치를 업로드할 수 있습니다.
- 리눅스 프로세서의 사용, Bridge library를 이용하여 보드의 능력을 확장시킬 수 있습니다.
특징
-
AVR Arduino microcontroller
Microcontroller ATmega32U4 Operating Voltage 5V Input Voltage 5V Digital I/O Pins 20 PWM Output 7 Analog I/O Pins 12 DC Current per I/O Pin 40 mA on I/O Pins; 50 mA on 3,3 Pin Flash Memory 32 KB (of which 4 KB used by bootloader) SRAM 2.5 KB EEPROM 1 KB Clock Speed 16 MHz Linux Microprocessor
Processor Atheros AR9331 Architecture MIPS Operating Voltage 3.3V Ethernet 802.3 10/100Mbit/s WiFi 802.11b/g/n 2.4 GHz USB Type 2.0 Host Card Reader Micro-SD RAM 64 MB DDR2 Flash Memory 16 MB Clock Speed 400 MHz
문서
-
OSH: Schematics
The Yún Rev. 2 is open-source hardware! You can build your own board using the following files:
EAGLE FILES IN .ZIPSCHEMATICS IN .PDFBOARD SIZE IN .DXFCompatibility
The Yún Rev. 2 board allows you to connect to the internet using the onboard WiFi or Ethernet connection. Furthermore thanks to the Bridge library it able to extend the functionalities of the Microprocessor by using the computational power of the Linux processor on the shield. Using the Yún Web Panel it is also possible to configure all the shield-related features and remotely upload sketches on the board connected to the shield.
On-board Indicators
The shield contains a number of signalling LEDs:
- ON (green): indicates that the shield is properly powered
- WLAN (blue): indicates a connection to a wireless network
- WAN (red): indicates connection to ethernet
- USB (white) : indicates system activity and/or if a USB key is mounted