RISC-V AI + IoT 용 Sipeed Maixduino 인공지능 키트 -LCD, OV2640 카메라
(Maixduino AI Development Kit K210 RISC-V AI + lOT ESP32)
개요
- 본 제품은 RISC-V AI + IoT 용 Sipeed Maixduino 인공지능 키트입니다.
- LCD와 OV2640 카메라 모듈이 포함되어 있습니다.
- RISC-V AI + IoT 용 Sipeed Maixduino 인공지능 보드와 LCD가 포함되어 있는 제품입니다.
- MAIX AI 모듈 및 ESP32 모듈을 기반으로 한 제품으로 아두이노 폼 팩터로 디자인되었습니다.
- MAIX는 엣지 인공지능을 실행할 수 있게 디자인된 제품으로 인공지능 모델을 클라우드에서 엣지 네트워크상의 디바이스로 옮겨 오게 하여 주어 AI IoT 프로젝트를 쉽게 진행할 수 있습니다.
특징
- CPU: RISC-V Dual Core 64bit, with FPU; 400MHz standard frequency (overclockable)
- Built-in neural network processor
- Connector: compatible with Arduino interface, TF card slot, speaker port
- Wireless: support 2.4G 802.11.b/g/n and Bluetooth 4.2
- Audio: MEMS microphone, 3W speaker output
- 8 Bit (256 levels) adjustable color, 5Bit (32 levels) brightness adjustment
- DVP Camera Interface: 24P 0.5mm FPC connector, support 0V2640, 5640, 0V7740, etc.
- LCD Interface: 24P 0.5mm FPC connector; support 8bit MCU LCD
- ESP32 Module: support 2.4G 802.11.b/g/n
Bluetooth v4.2 full specification, including traditional Bluetooth (BR / EDR) and Bluetooth Low Energy (BLE)
- Development Environment: support for Arduino IED, MaixPy IDE, OpenMV IDE
- Dimension: 68x 54mm/2.68x 2.13"
- Power Input: USB Type-C (6~12V)
- Temperature Rise: <20K
- Operating Temperature: -30~85ºC
- MCU: ESP8285
- Wireless Standard: 802.11 b/g/n
- Frequency Range: 2400Mhz~2483.5Mhz
- Transmit Power: 802.11.b:+15dBm
802.11.n:+10dBm(65Mbps)
- Wireless Connector: IPEX 3.0x3.0mm
- WiFi Mode: Station/SoftAP/SoftAP+Station
-
Note: The shape and pins are compatible with Arduino UNO R3 but the voltage level is not compatible, which requires great attention, otherwise the board can be damaged. Maixduino supports 3.3V and 1.8V levels, and the pins are divided into several BANKs, each BANK can be set to a voltage of 1.8V or 3.3V by software, However, these pins are not 5V tolerated. Therefore, when using the peripheral device of Arduino, be careful not to short the 5V to the pin or RST (1.8V) pin.
-
SHIPPING LIST
- Maixduino controller x1
- 2.4"LCD screen x1
- OV2640 camera x1