아두이노 SAMD21 프로 RF 로라 보드 -915Mhz LoRa
(SparkFun Pro RF - LoRa, 915MHz (SAMD21))
개요
- 본 제품은 아두이노 SAMD21 프로 RF 로라 보드 -915Mhz LoRa입니다.
- SAMD21 MCU와 RFM95W LoRA 칩이 결합된 아두이노 보드입니다.
- 배터리 연결을 위한 2핀 JST 커넥터를 장착하고 있으며, microB USB 커넥터를 장착하고 있습니다.
- on/off 전원 스위치 및 reset 스위치를 지원합니다.
- 아두이노 LoRA 라이브러리를 이용하여 RFM95W 칩을 사용할 수 있으며, 보드 밑면의 점퍼를 설정하여 LoRaWAN 모드를 시작하여 distributed sensor network상의 노드로 만들 수도 있습니다.
특징
- SAMD21G18A
- Cortex M0+
- 256KB Flash Memory
- 32MHz External Oscillator
- 4 Digital and 5 Analog IO Pins with exclusive GND pins
- Hope RFM95W LoRa modem
- Point to Point Radio capabilities
- LoRa Enabled
- Frequency range: 915 MHz
- Spread factor: 6-12
- Range up to 1 mile line of sight
- U.FL Antenna
- LiPo Battery Charger
- 500mA Charge Rate
- Qwiic Enabled
- Power LED disconnect jumper for low power applications.
- PTH pins for software debug (SWD)
-
Revision Changes: On this revision of the SAMD21 Pro RF, we have made a few changes to improve the board, listed below. If users are unsure about which version they purchased, please refer to the product pictures.
- Fixed the VDDCORE pin connection issue
- Broken out an LED jumper for low power applications
- Added PTH pins for software debug (SWD)