AudioB 블루투스 5.0 멀티포인트 오디오 리시버 모듈 -와이어 안테나
(AudioB Bluetooth 5.0 Multipoint Audio Receiver Module -Wire Antenna)
개요
- 본 제품은 AudioB 블루투스 5.0 멀티포인트 오디오 리시버 모듈 -와이어 안테나입니다.
- 블루투스 오디오 앰프를 만들때 사용이 가능한 제품으로 블루투스 5.0 멀티포인트 스테레오 오디오 리시버 모듈입니다.
- CSR8675 기반의 제품으로 2mm 피치의 2x10 핀을 통해 인터페이스 접근이 가능합니다.
- 와이어 안테나를 장착하고 있습니다.
특징
- Bluetooth 5.0
- Multipoint connection
- Qualcomm cVc audio technology
- Qualcomm TrueWireless Technology
- Stereo receive
- Effective transmission distance: 10-15m
-
Single-ended signal output
Single-ended signal output with headphone/small speakers
문서
-
How to Use:
Master module:
- Power up the module, Blue LED slow blink.
- Double click S1 to set the module into Pairing mode. Blue LED fast blink. (Voice: Pairing)
- Now, Your smartphone will be able to find a new Bluetooth device which name is "CSR8675". Connect it.
- You can play the music now. If you only use one module as a normal receiver. You don't need do the following steps.
- Click S2, Set the module to transmitter mode.(Voice: transmitter mode)
Slave module:
- Power up the module. Blue LED slow blink.
- Make sure master module already working correct and in transmitter mode. Click S3 to set salve module into receiver mode. It will auto searching the master module. (Voice: receiver mode, searching)
- Double click the S2 on the Master module. The master module will auto searching(30s) slave module. Both master and slave module will be connected. (Voice: searching)
- The slave module will bave music out now.
- If there have new module want join as slave modue. Just click S3 on new module and Double click S2 on Master module.
- If a slave module want quit. Click S2 on that module.
Note: If you don't hear the voice prompt when click S2. Please click the S3 to switching the mode and then click S2 again.
- How to change the BT name
- Bluesuite2.5.0
- Dimensions
- Firmware
- How to change the EQ