스테레오 블루투스 오디오 앰프 모듈 -BT 5.0
(Stereo Bluetooth Amplifier Board)
개요
- 본 제품은 스테레오 블루투스 오디오 앰프 모듈입니다.
- 블루투스 5.0을 지원하며 볼륨조절 스위치가 장착된 제품입니다.
- 두개의 고출력 스피커(40W-200W)에 연결하여 사용이 가능합니다.
- 대략 최대 15미터의 통신거리를 가집니다. (환경에 따라 다름)
특징
- Voltage: 5-24V
- Bluetooth 5.0
- Transmission Distance: 15m (visible)
- Sound Channel: two channels (stereo)
- Output Power(@1KHz): 20W*2 @12V 4Ω
30W*2 @21V 8Ω
40W*2 @24V 8Ω
- Match Speaker: 4Ω(5~16V), 8Ω(5~24V)
-
SHIPPING LIST
- Stereo Bluetooth Amplifier Board x1
- Acrylic Shell x1
- Accessories Packet x1
문서
-
Operating Instruction
After the power is turned on, the blue indicator flashes quickly, and then it enters the Bluetooth mode; After playing the Beep, it goes into the pairing mode, waiting for pairing; Turn on the Bluetooth of a phone or Raspberry Pi, "XY-P40W" (module Bluetooth name) will be searched and displayed, click "XY-P40W" to connect to the board. It connects successfully with a Beep. When the indicator is always on, you can play your music on the phone, the indicator keeps slowly blinking when playing music.
Note:
1. Keep the amplifier board as far away as possible from the WIFI signal (router).
2. 5-24VDC is recommended; upper than 26V, the chip will be burnt.
3. Input voltage can not exceed 16V when connecting to 4Ω speakers, and not exceed 24V when connecting to 8Ω speakers.
4. Recommended power supply current 2A at least.
5. The speaker wire should be within 1m.
6. Pay attention to electrostatic protection. Since the Bluetooth chip is very sensitive to static electricity, you must discharge the static electricity on your hand to avoid the static electricity from puncturing the chip when touching the board.
7. It is recommended to use a speaker above 40W to avoid speaker damage.
8. When the module's power supply voltage is relatively low but the output power is relatively large, noise may be produced. You can reduce the volume or increase the power supply voltage to solve it.