USB-C PD 트리거 모듈 -PD2.0, PD3.0, Female
(USB-C PD Trigger Module -PD2.0, PD3.0, Female)
개요
- 본 제품은 USB-C PD 트리거 모듈 -PD2.0, PD3.0, Male입니다.
- USB-PD 기술을 사용한 USB-C타입의 배터리 충전 전원의 전압을 원하는대로 변경시켜줄 수 있는 제품입니다.
- USB-PD는 새로운 충전 기술 중 하나로, 기존에 비해 훨씬 더 많은 전력과 데이터를 전송할 수 있는 것이 특징으로 대용량 배터리에 주로 사용이 됩니다.
- 출력 전압은 5V / 9V / 12V / 15V / 20V 로 변경이 가능합니다.
- 전원이 켜지면 PD 프로토콜 타입이 화면에 표시됩니다.
- USB C Female 커넥터를 가지고 있습니다.
특징
- Display the type of PD protocol on each power up
- '---': PD protocol not supported
- Pd2.0: support pd2.0 protocol
- Pd3.0: support pd3.0 protocol
문서
-
How to switch display content
- In the operation interface, short press key K1 to switch the display voltage / current / display in turn; long press key K1 for 5 seconds to turn off the display of nixie tube and indicator light, and any key will wake up.
How to adjust the voltage range
- In the operation interface, short press the K2 key to enter the voltage regulation interface, and the voltage will flash after the current gear is displayed on the nixie tube;
- At this time, short press the K2 / K1 key to modify (K2 for upshift and K1 for downshift). When shifting gears, first display "p7-1" (P7: supports 7 voltage gears in total, - 1: represents the serial number of current voltage gear), and then display the voltage value of current gear. If the current voltage gear supports PPS step-by-step voltage regulation, the step-by-step indicator light (20mV 100mV 1V) will be fully on;
- In 5S, there is no key operation or long press K1 key 2s to return to the operation interface automatically;
- the last gear "L" of "p7-l" is triggered in turn. When the L gear is selected and returned to the operation interface, all supported gears (5V / 9V / 12V / 15V / 20V / PPS mode) will be triggered in turn. In this mode, the step voltage indicator light of the operation interface will be indicated by the running lamp mode. This function can be used for batch testing by the manufacturer of the charging head.
- the charging head of pd2.0 generally supports 4-5 gear voltage regulation modes, and will display "p4-1" or "p5-1" format. The charging head of pd3.0 generally supports 6-7 gear voltage regulation modes, and will display "p6-1" or "p7-1" format
How to adjust the voltage in PPS step-by-step mode
- First, ensure that PPS step gear indicator (20mV 100mV 1V) is fully on / on one of them;
- Long press the K2 key to enter PPS voltage regulation, the voltage value of the nixie tube flashes, and the 1V step gear voltage regulation is activated first;
- Press and hold K2 again to change step gear;
- After selecting the corresponding step gear, modify the voltage by pressing the K1 / K2 key briefly; when the step gear indicator is fully on, press the K1 / K2 key briefly to exit the PPS voltage regulation mode and select other voltage gears;
- In 5S, there is no key operation or long press K1 key 2s to return to the operation interface automatically; This product has power-off memory function. Remember the voltage gear and PD mode before power-off next time.