라즈베리 파이용 GPS/RTC 확장 보드 -GNSS, -u-blox M8
(Raspberry Pi GPS/RTC Expansion Board)
개요
- 본 제품은 라즈베리 파이용 GPS/RTC 확장 보드입니다.
- 멀티 GNSS GPS 리시버로 하드웨어 RTC를 지원하는 제품입니다.
- uBlox사의 GNSS u-blox 8 / u-blox M8 모듈 을 장착하여 BeiDou,Galileo,GLONASS,GPS/QZSS를 지원합니다.
- 2x20 헤더를 장착하고 있습니다.
- PPS(Pulse per second) 출력을 채용하여 PPS disciplined NTP server로 보드를 사용할 수 있게 하며, Ublox GPS모듈의 RAW 출력을 사용할 수 있게 하여 줍니다.
- 트윈 슈퍼 캡을 사용하여 hot start/setting 유지 및 RTC 에 전원을 유지할 수 있게 하여 줍니다.
- RTC는 I2C 인터페이스를 가진 RV-3028을 사용하고 있습니다.
- GPS 안테나 연결을 위한 SMA 커넥터를 장착하고 있습니다.
특징
-
GPS Specifications:
• 72-channel u-blox™ M8 engine
• Up to 3 concurrent GNSS (BeiDou,Galileo,GLONASS,GPS/QZSS)
• Default GNSS: GPS/GLONASS.
• -167dBm Navigation Sensitivity
• 10Hz navigation rate in multiGNSS mode, 18Hz in GPS only
• RAW Output available via UBX-RXM-RAWX Message
• 3V supplied to antenna port to power active antenna
• Antenna requirements: Active 3V Ceramic Patch
• No EEPROM settings must be sent at power up or saved to battery backed RAM.
• Default baud rate: 115200bps
• I2C Bus (Address 0x42)
• Robust SMA antenna connection.For full documentation please consult the u-blox 8/u-blox M8 receiver description including protocol specification document (UBX-13003221)
RTC Specifications:
• Micro Crystal RV-3028-C7 Real Time Clock Module
• Factory calibrated ±1 ppm @ 25°C
• I2C Bus (Address 0x52)
• Built in kernel compatibility
• Provides year, month, date, weekday, hours, minutes and secondsIn The Box
1 x Raspberry Pi GPS/RTC Expansion Board
4 x 11mm standoffs w/8 M2.5 Screws
1 x Header with 4.93mm tails