2x30W 스테레오 오디오 앰프 -AP3015
(2x30W Stereo Audio Amplifier -AP3015)
개요
- 본 제품은 2x30W 스테레오 오디오 앰프 -AP3015입니다.
- 앰프가 내장되어 있어 스피커를 바로 연결하여 사용이 가능하며, 볼륨 조절용 포텐셔미터가 장착되어 있습니다.
- 3.5mm 크기의 오디오 잭과 스피커 연결용 터미널 블럭이 장착되어 있습니다.
특징
-
1>.Product name Stereo Power Amplifier Module2>.Work Voltage:DC 8V-24V4>.Work Mode:Class D(PWM)5>.Channel:Dual channel6>.Output Power:6.1>.Output power 18W*2 at 12V 4ohm6.2>.Output power 10W*2 at 12V 8ohm6.3>.Output power 15W*2 at 16V 8ohm6.4>.Output power 20W*2 at 20V 8ohm6.5>.Output power 30W*2 at 24V 8ohm(Need add extra heat sink!)7>.Match speaker(30W~150W):7.1>.4ohm at 8V~12V7.2>.8ohm at 8V~24V8>.Work Temperature:-40℃~85℃9>.Work Humidity:0%~95%RH10>.Module Size:59*32*14mm
문서
-
1>.Choose the right speaker and connect as shown in wiring diagram.2>.Connect to right power supply from input terminal.3>.Connect audio signal from 3.5mm socket or blue terminal.4>.Test and use.
-
Note:1>.The power amplifier board should be as far away as possible from the WIFI signal (router) avoid signal interference.2>.Recommended power supply voltage DC 8~24V.Module will be damaged if input voltage is more than 26V.3>.Input voltage can not more than 12V if connect 4ohm speaker.4>.Input voltage can not more than 24V if connect 8ohm speaker.5>.It is recommended to use a power supply of 2A or higher.6>.It need add extra heat sink if output power is more than 20W*2.7>.Please don’t use too long wires to avoid signal interference.8>.It is recommended to use a speaker above 30W to avoid speaker damage.9>.Please read use manual and description before use.