Input voltage: 6V-40V DC
Output voltage: continuously adjustable (1.2-35VDC) for a long time below 32V (applicable to applications where the input voltage is higher than the output voltage and cannot be boosted)
Output current: Maximum 20A, within 15A for a long time (the temperature of the power tube exceeds 65 degrees, please add a fan to dissipate heat, please use derating for high voltage output)
Current limit range: 0.3.-20A (adjustment) module over 65 degrees, please add a fan.
Minimum pressure difference: 3V
Working frequency: 150KHZ
Conversion efficiency: up to about 97% efficiency is related to pressure difference and use environment
Output ripple: Ripple around 50mV (no noise) 20M bandwidth (for reference only) 24V input measured
Working temperature: -10℃ to +75℃) (Please pay attention to the temperature of the power tube in actual use, please strengthen heat dissipation or use derating if the temperature is too high)
Potentiometer adjustment direction: clockwise (increase), counterclockwise (decrease)
Output short circuit protection: Yes (instantaneous protection) constant current (current setting constant current value can not be short-circuited for a long time)
Input reverse protection: None,
Output anti-reflow prevention: No, it is used to load self-charged or inductive load requires an external diode!
Wiring mode: terminal block
Scope of application: high-power LED constant current drive, lithium battery charging (including ferroelectric), 4V, 6V, 12V, 14V, 24V battery charging, nickel-cadmium nickel-metal hydride battery (battery pack) charging, solar panels, wind generators