MS1100 포름알데히드/벤젠 VOC 가스센서
(MS1100 VOC Gas Sensor)
개요
- 본 제품은 MS1100 포름알데히드/벤젠 VOC 가스센서입니다.
- MS1100 가스센서를 탑재한 제품으로 포름알데히드, 벤젠, 톨루엔 등의 VOC 가스센서를 탑지할 수 있는 제품입니다.
- 0-1000PPM의 측정 범위를 가지고 있습니다.
- 센서는 아날로그 핀과 디지털 핀을 가지고 있습니다.
- 측정된 값이 크면 큰 아날로그 출력 전압을 가지며, 디지털 출력은 보드상의 포텐셔미터로 설정된 값 이상 가스 검출시 HIGH로 출력됩다.
특징
- power supply voltage: +5V
- AOUT : Analog output, the voltage value corresponding to the amount of gas detected by the chip changes, the microcontroller can be directly connected using the ADC.
- DOUT: Digital output, the result of comparing the output voltage values of AOUT and adjustable resistors. Output semaphores 0 and 1.
- Adjust the adjustable resistance of the module. When the voltage of the adjustable resistor output is less than AOUT, DOUT outputs a high level and the LED light is on; otherwise, DOUT outputs a low level and the LED is off.
- variable resistance: 4K
- Clean air voltage <1V
- response speed <5S
- Working temperature: -10 degrees Celsius ~ 60 degrees Celsius,
- Working humidity: 90% RH
-
Connect to the microcontroller:
- VCC - 5V of single chip microcomputer
- GND - GND A of the microcontroller
- OUT - AD input pin of the microcontroller
- DOUT - any available pin of the microcontroller
-
Precautions :When needed, the module needs to be warmed up for 3-5 minutes before making relevant measurements.