광섬유 통신 듀플렉스 보드 -RX/TX
(Fiber Duplex Breakout)
개요
- 본 제품은 광섬유 통신 듀플렉스 보드입니다.
- 임베디드 장치간 광섬유 연결을 하기 위해 디자인한 제품으로 아두이노 프로 미니와 같은 시리얼 연결 핀과 같은 핀아웃을 가지고 있는 제품입니다.
- 각각의 보드에 본 보드를 연결하고 두개의 광섬유를 연결하면 됩니다.
- Serial library를 이용하여 데이터를 주고 받을 수 있습니다.
- 또한 Serial Fiber Modem보드와도 사용이 가능하여 PC와 임베디드 장치간 광통신이 가능하게 할 수 도 있습니다.
특징
- Easily create fiber serial links between embedded devices
- Supports Serial Baud Rates up to 1Mbps
- 6-pin Serial Header is compatible with most Arduino Mini style dev boards
- 5V and 3.3V compatible
-
The Industrial Fiber Optics line of emitters and detectors are by far the most economical way we've found to create a simple fiber link between two devices. The IF-E97 emitter is literally just a superbright red LED in a fancy plastic module that makes it easy to insert a piece of optical fiber and lock it in place. On the other end, the IF-D96F is a 5V TTL phototransistor in an identical enclosure. Connect the two with a piece of fiber and you have, basically, the simplest possible fiber link. Speaking of fiber, while you can certainly use glass fiber (in the proper jacket) to connect these modules together, we recommend PMMA plastic fiber! It's cheap, it's not at all fragile, and you can cut it with scissors. In our experience, it requires no polishing at all, simply cut it with scissors and jam it into the connector.
The emitter and detector are soldered but not screwed into place. For field applications we recommend anchoring the connectors with a screw and nut. A 4-40 screw with nut works great but we don't carry the ideal 3/8" length. Alternatively we do carry a 3/8" screw and nut in the smaller 2-56 thread.
We've tested these modules at baud rates up to 1Mbps and distances up to 50 meters with no transmission errors.