리포배터리 슈퍼충전기/부스터 모듈
(Elektor DIY LiPo Supercharger Kit)
개요
- 본 제품은 리포배터리 슈퍼충전기/부스터 모듈입니다.
- 싱글셀 리포 배터리를 충전할 수 있으며, 과전압, 과부하, 쇼트서킷에서 보호하여 줍니다.
- 추가로 배터리 전압을 5V나 12V로 부스트하여 줄 수 있습니다.
- 부스트된 출력 전압은 eFuse IC (outputting 1.52A at 5V or 0.76A at 12V maximum)로 보호됩니다.
- 충전기는 USB-C 커넥터나 PCB 패드를 통해 5V가 필요합니다.
특징
- include
- 1x Mainboard pre-assembled with the four ICs
- 15x Resistors
- 3x LEDs
- 13x Capacitors
- 2x Switches
- 1x USB-C on a breakout board
- 2x Diodes
- Battery - Single-cell lithium-ion or lithium-polymer battery
- Input Voltage - +5V / 2A max.
- Output Voltage
- 5V / 1.52A
- 12V / 0.76A
- LiPo Protection - XB8089D
- Overcharge Detection - 4.250V
- Overcharge Release - 4.10V
- Overdischarge Detection - 2.50V
- Overdischarge Release - 3V
- Overcurrent Detection - 10.0A
- Thermal Shutdown Auto-retry
- Enable/Undervoltage Lockout
- Rising: 1.2V (typ.)
- Falling: 1.1V (typ.)
- Note: This kit requires surface mount soldering which is a bit more difficult than through-hole. The pads are larger to allow for soldering with a soldering iron, but it does take a bit of skill.