Nth Light 사의 유연한 좁은 LED 스트립
(Nth-Light Narrow LED Flexible Strip Light)
개요
- 본 제품은 Nth Light 사의 유연한 좁은 LED 스트립입니다.
- 개별적인 LED를 납땜한 것이 아닌 micro LED 다이오드를 유연한 플라스틱 표면에 프린트를 하여 놓은 제품입니다.
- 12VDC로 사용이 가능합니다.
특징
- Low Glare and Shadowing
- Highly Flexible, 5mm Radius
- Low Profile, Thin as 0.006" (+/- 0.001")
- Very low operating temp, cool to the touch, no heat sink needed
- Impact Resistant
- Diffuse Light, No Lens or Optics Required
- Copper Electrical Bus Bar
- Power Req.: 12V DC @ 65mA
- LEDs/ ft.: ~1,200
- Luminous Efficacy: ~30 lm/Watt
- CRI: ~76 CRI
- Color Temp: ~5800 K
- Product Dimensions: 305.0mm x 63.5mm x 0.4mm / 12.0" x 2.5" x 0.0"
- Product Weight: 6.0g / 0.2oz
-
Here at Adafruit we never get tired of new and exotic glowing things. Like moths to the flame, we were intrigued by this new LED technology from Nth Light. Instead of having individual LEDs, Nth prints micro LED diodes onto a flexible plastic substrate for a unique look.
The Nth-Light Narrow LED Flexible Strip Light is printed in three basic processes, starting with standard LED wafers. These wafers are then cut into micro LEDs the same size as ink particles, and are suspended into inks for printing. Printed LEDs are very thin, lightweight, and naturally diffused, unlike the harsh glare from point-source LEDs.
This strip light is easily installed, very flexible, very thin, and great for uneven surfaces. Add it as a lighting source to work spaces, car interiors, even wearables and cosplay! Usage is simple, power with 12VDC at one end for ~450mA draw over the foot-long strip, you can cut these strips into 6 pieces, then just strip away a little plastic if you want to solder to the power rails on either side
Note that each square of light isn't completely uniform, it has a dappled look, that's normal! you may want to add a diffusing layer to smooth them out. Still, there isn't anything like this so we think it is a nifty unique light strip.