TTL 시리얼 -CAN 버스 변환 모듈 -MCP2515, TJA1050
(TTL Serial - CAN Bus Module -MCP2515, TJA1050)
개요
- 본 제품은 TTL 시리얼 -CAN 버스 변환 모듈 -MCP2515, TJA1050 입니다.
- MCP2515, TJA1050 CAN 컨트롤러 및 트랜시버를 탑재한 제품으로 CAN 패킷을 TTL 시리얼로 변환하여 줍니다.
- 5V로 동작하며, DIP스위치를 통해 baud rate 조절이 가능합니다.
특징
-
input voltage : DC 5V
TLLlevel:Serial resistance current limiting,compatible3.3Vand5VSuitable for all kinds of single chip microcomputer
frame format:Extended frame and standard frame are optional
Baud rate:500K(default)/100K/250K/500KOptional
Support data transmission、supportCANmouthIDReceiving and sending
Interface:SIP2.54-4P/2EDGK3.81-4PandSIP2.54-2P/2EDGK3.81-2POptional
useM3Fixed installation of metal fixing screw hole,It can be applied to industrial automation equipment,laboratory、computer、debugging、Superior use.
문서
-
TTL Serial port transfer CAN Bus module
Serial port parameters:TTLlevel,compatible3.3Vand5VSCM serial port level。
(notes:Do not use computer directlyRS232,The computer needs to be connected throughTTLturnRS232modular)
Baud rate:115200;
Data bits:8position ;
Stop bit:1position;
Check digit:nothing;
CANMouth parameters:Dial switch can be used,choiceCANmouth:pattern、frame format,Baud rate。Default factory parameters:
frame format:Standard frame;
Frame type:Data frame;
Baud rate:500K
Data transfer mode:transparent transmission
Dial switch settingCANMouth parameters:The default switch is on the left,All of themOFF
3.1 SW2andSW3Corresponding baud rate:
SW2
SW3
Baud rate
OFF
OFF
500K
ON
OFF
1M
OFF
ON
250K
ON
ON
100K
3.2 SW1Frame format andSW4Data transmission mode selection:
(1)Choose either extended frame or standard frame,Select the same frame format for both sending and receiving,Other frame formats are not accepted。
(2)SW4Data transfer mode
ON:Sending and receiving data tape through serial portCANIdentifier of the port(ID)。
Extended frame:Serial port sending and receiving:front4Bytes areCANIdentifier of the port(ID)
Standard frame:Serial port sending and receiving:front2Bytes areCANIdentifier of the port(ID)
OFF:Does the serial port send or receiveCANIdentifier of the port(ID),That is, all bytes are data。
Module test
5.1Hardware: CANBus Analyzer,Serial port transferCANPort module andTTLturnRS232
5.2Software:Serial assistantXCOM;CANOriginal software of analyzerUSB_CAN TOOL