TTGO T-01C3 ESP32-C3 WIFI 블루투스 5.0 모듈
(TTGO T-01C3 ESP32-C3 WIFI Bluetooth 5.0 Module)
개요
- 본 TTGO T-01C3 ESP32-C3 WIFI 블루투스 5.0 모듈 입니다.
- ESP32-C3 RISC-V 기반의 모듈로 4MB 플래쉬, PCB 안테나를 가지고 있습니다.
특징
- SoC – Espressif ESP32-C3 RISC-V processor @ 160 MHz with 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM, 2.4 GHz WiFi 4, Bluetooth 5.0 LE & Mesh
- Storage – 4MB flash
- On-board PCB antenna
- I/Os – 22x castellated holes with GPIO, 3x ADC, SPI, UART, I2C, Boot, Reset, 5V, 3.3V, GND
- Dimensions – 23 x 11 x 3.5 mm (4-layer PCB)
-
Pinout mapNote the USB interface is not listed in the specs, but USB DN and DP signals are located on GPIO18 and GPIO19 so USB should also be supported.
문서
- https://github.com/espressif/arduino-esp32/releases/tag/2.0.0
-
There's no wiki for T-32C3, but you should be able to use the ESP-IDF framework or even ESP32 Arduino 2.0.0 core that was released a few days ago with ESP32-C3 (and ESP32-S2) support. Espressif posted a getting started guide for their own ESP32-C3 hardware a little while ago.