온습도 센서 -BPS240
(TEMP&HUM 19 CLICK)
개요
- 본 제품은 온습도 센서 -BPS240입니다.
- BPS240 칩을 장착하고 있으며, I2C 인터페이스를 가지고 있습니다.
- 3.3V/5V 시스템과 사용이 가능합니다.
특징
-
HOW DOES IT WORK?
Temp&Hum 19 Click as its foundation uses the BPS240, relative humidity, and temperature sensor from Bourns. The BPS240 is based on innovative MEMS technology, which provides highly accurate condition readings. The humidity can be measured within a range of 0 to 100 %RH, while the temperature sensor is designed for a range of -30 to +100 °C. The enhanced features include a faster response time of less than one second with digital output and higher accuracy, with a typical RH accuracy of 2% in the measuring range of 20 up to 80 %RH at ambient temperature, and ±0.3 °C for its operating temperature range with low power consumption.
Temp&Hum 19 Click communicates with MCU using the standard I2C 2-Wire interface to read data supporting Standard Mode operation with a clock frequency up to 100kHz, providing 10-bit data to the host controller. The output data is processed and compensated by the BPS240 sensor itself, requiring only basic conversion formulas to be applied within the firmware of the host controller. These conversion formulas are given in the BPS240 datasheet and directly provide readings in °C and %RH.
This Click board™ also possesses enabling function, the Enable pin labeled as EN and routed to the PWM pin of the mikroBUS™ socket, which activates and powers up the BPS240 (used for power ON/OFF purposes), and thus enables optimizes power consumption.
This Click board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the I2C communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
-
Type Temperature & humidity Applications Can be used for various temperature and humidity-related applications and a vast number of applications ranging from HVAC systems, climate monitoring up to diagnostic and analysis equipment, and many more On-board modules BPS240 - relative humidity, and temperature sensor from Bourns Key Features Low power consumption, fully-calibrated and temperature-compensated, high precision and accuracy, I2C interface, reliable in harsh environments, and more Interface I2C Compatibility mikroBUS Click board size S (28.6 x 25.4 mm) Input Voltage 3.3V or 5V