양측면 네오픽셀 LED 스트립 -120LED/1M
(Dual Edge Side-Light NeoPixel LED Strip
with 120 LEDs per meter - 1 meter long)
개요
- 본 제품은 양측면 네오픽셀 LED 스트립 -120LED/1M입니다.
- LED 스트립 양 측면에 네오픽셀 LED가 장착이 되어 있는 제품입니다.
- 한쪽 측면에 60개씩 총 120개의 LED가 장착되어 있는 1미터 길이의 LED 스트립입니다.
특징
-
5V power
문서
- Datasheet
-
Fancy new dual-sided NeoPixel strips are a great alternative for folks who have loved and used Adafruit LED strips for a few years but want gorgeous, glowy light from both sides! These are called "120 LED per meter" because they have the same density as 60 LED per meter strips, and then of course, two LEDs on either side. Both top and bottom LED in each segment will always display the same color. You can run them along a thin edge and curve them around shapes and corners. These look awesome for accent lighting, backlighting, edge lighting, etc!
The strip is constructed of flexible white PCB material with weather-proof sheathing. You can cut this stuff pretty easily with wire cutters. There is a cut line halfway down the strip. Solder to the 0.1" copper pads, and you're good to go! Of course, you can also connect strips together to make them longer, just watch how much current you need!
You'll get 1 meter long strip with JST SM 3 pin connectors at both ends. Provide 5V on the power pins, and provide your standard issue NeoPixel (WS281x) data on the third pin - don't forget to share the ground pin between the 5V power supply and your microcontroller. Boom - you're glowin' in style.