4선 바이폴라 스텝 모터 -NEMA 23, 9mm GT2 Pulley
(Stepper Motor - NEMA-23 Size
with 9mm GT2 Pulley - 140 oz/in 2.8A)
개요
- 본 제품은 4선 바이폴라 스텝 모터 -NEMA 23, 9mm GT2 Pulley 입니다.
- NEMA-23 사이즈의 스텝모터로 샤프트에 9mm 크기의 축바퀴가 부착되어 있습니다.
- 스텝당 약 1.8도의 스텝을 가집니다.
특징
-
Motor Specifications:
- 140 ozIn. Stepper Motor
- 1.8°/200 Steps Per Rev.
- Rated Voltage: 2.3V
- Rated Current: 2.8 Amps Current Per Phase (Bipolar Parallel)
- 4-wire Bi-polar NEMA 23 Frame
- Inductance: 2.2 mH
- GT2 Pulley: 20 Tooth, 2mm Pitch, 12.7mm Pitch Diameter
Cable Technical Data
- Cable: 4 connectors, 22 AWG
- Shield: Foil
- Jacket: PVC
- Connectors: 11 pin JST / Wire ferrules
Product Weight: 601.6g / 21.2oz
-
Includes:
• 1 x Stepper motor with attached pulley
• 1 x Set of cable assembliesDoes Not Include Mounting Hardware!
문서
- Datasheet
-
These NEMA-23 Size Stepper Motors come to us from X-Carve, they're used by folks to make CNC machines so they're very strong, fast and reliable. In the X-Carve, these run the three axes on their routing machine and have pulleys pre-attached (see datasheet for the pulley specification). For wiring, there's a snap-in wiring harness
This 4-wire bipolar stepper has 1.8° per step for smooth motion and nice holding torque. The motor was specified to have a max current of 2.8A so if you have a stepper driver with current limiting, set the max to 2.8A (or less). You can use our DRV8833 driver chip with this stepper, it's limited at 1A so you wont get the max torque. Or you can go with a real CNC driver board like the gShield or tinyG CNC controller for multiple stepper control!