DIN Rail 듀얼 1x6 - 터미널 블럭 어답터 -전원 결선
(DIN Rail Dual 1x6 to Terminal Block Adapter)
개요
- 본 제품은 DIN Rail 듀얼 1x6 - 터미널 블럭 어답터입니다.
- DIN 레일 형태의 터미널 블럭으로 한쪽에는 2개의 스프링 터미널 블럭, 다른 쪽에는 2x6개의 블럭이 위치하고 있습니다.
- 복잡한 전원 전선 연결을 간단하게 만들어 줄때 사용하기 좋은 제품입니다.
- 위 사진에서 빨강 전선은 다 연결되어 있으며, 검정 전선도 각각 다 연결되어 있습니다.
특징
- n/a
문서
-
This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex power supply wiring. There's two spring-terminal blocks on one side of the PCB, and a 2x6 set of connected blocks on the other. As you may expect, the positive marked terminal blocks are all connected together, as are the negative marked blocks.
Use stranded or solid-core wires, they can be signal or power wires. And of course you can fit a few wires per block so it isn't just 1:1 wire connection.
No soldering required! Just push in the terminal block tabs and slide in your stranded or solid-core wire. DIN rail not included, of course.