VEML7700 I2C 조도센서 -Lux 값 출력, 오른각
(Adafruit Right Angle VEML7700 Lux Sensor
- I2C Light Sensor - STEMMA QT / Qwiic)
개요
- 본 제품은 VEML7700 I2C 조도센서 -Lux 값 출력, 오른각 입니다.
- I2C 인터페이스를 가지고 있으며, Lux 값을 직접 출력하여 주는 제품입니다.
- 16비트 0 lux에서 120klux까지의 dynamic range (분해능0.0036 lx/ct)를 가지고 있으며, software-adjustable gain 및 integration time을 가지고 있습니다.
- 센서가 윗면이 아닌 오른쪽을 보게끔 장착되어 있습니다.
특징
-
Vishay has a lot of light sensors out there, and this is a nice simple lux sensor that's easy to add to any microcontoller. Most light sensors just give you a number for brighter/darker ambient lighting. The VEML7700 makes your life easier by calculating the lux, which is an SI unit for light. You'll get more consistent readings between multiple sensors because you aren't dealing with some unit-less values.
It's also one of the very few light/lux sensors we've ever seen that is right angle - that means that it senses light that is coming parallel to the PCB surface not perpendicular.
The sensor has 16-bit dynamic range for ambient light detection from 0 lux to about 120 klux with resolution down to 0.0036 lx/ct, with software-adjustable gain and integration times.
As with all Adafruit breakouts, we've done the work to make this handy light sensor super easy to use. We've put it on a breakout board with the required support circuitry and connectors to make it easy to work with. Since I2C is supported, we've added SparkFun Qwiic compatible STEMMA QT JST SH connectors that allow you to get going without needing to solder. Just use a STEMMA QT adapter cable, plug it into your favorite microcontroller or Blinka supported SBC and you're ready to rock! QT Cable is not included, but we have a variety in the shop.
We have written libraries for Arduino (C/C++) as well as CircuitPython (Python 3) so you can use this sensor with just about any kind of device, even a Raspberry Pi!
-
Product Dimensions: 25.5mm x 17.7mm x 4.6mm / 1.0" x 0.7" x 0.2"
Product Weight: 1.9g / 0.1oz