닌텐도 스위치 쿨링 팬 -5V, 4선
(Nintendo Switch Cooling Fan)
개요
- 본 제품은 닌텐도 스위치 쿨링 팬입니다.
- 5V전원으로 동작이 가능하며 최대 8000RPM의 속도로 회전하며, 25Khz PWM 신호를 이용하여 제어가 가능합니다.
- 0.5mm 피치 FFC 케이블이 장착되어 있습니다.
- 작은 프로젝트에 적합합니다.
특징
- Pulls up to 0.4A at 5VDC
- FPC Pinout: 5V, Tach, GND, PWM
- Maximum Speed: 8000 RPM
- Sounds like a Struggling Laptop
문서
-
We sourced these small, 4-wire fans for our Qwiic Blower Fan product and we think they're pretty cool (pun Nintended). These are sold as Nintendo Switch replacement cooling fans and — while they certainly work in that capacity — their size and power make them useful in a whole host of small projects. Similar fans are used in all kinds of consumer electronics such as laptops, in fact this fan uses the same 4-wire pinout that you're used to seeing on traditional PC fans. Applying 5V will spin the fan up to its maximum speed of 8000 RPM, but if you want fine control over the speed, a 25kHz PWM signal can throttle the fan down. The only thing that makes these a little tricky to work with is the 0.5mm pitch flat flex cable. Unfortunately there's no datasheet available for this device as it appears to be a reproduction of the OEM produced for Nintendo by Foxconn.
If you want an easy way to interface with this fan, check out our Qwiic Blower Fan board.