16 채널 릴레이 모듈 -5V
(16 Channel Relay Board -5V)
개요
- 본 제품은 16 채널 릴레이 모듈 -5V입니다.
- 5V로 동작하는 릴레이 16개가 장착되어 있으며, Active Low(0-2V)에서 릴레이가 트리거 됩니다.
- 옵토커플러로 절연되어 있으며, 전기적인 간섭에 강한 제품으로 안정적인 성능을 보여줍니다.
- 릴레이 트리거를 위해서는 단 3mA만 필요하여 마이크로컨트롤러에서 제어가 가능합니다.
- 릴레이는 최대 250V/10A까지 사용이 가능합니다.
- 마운팅을 위한 4개의 구멍이 있습니다.
- 알림: 본 제품은 12V 및 5V 버전이 있으며, 5V 버전은 보드상 캐패시터가 장착되어 있지 않습니다. (사진 우측제품)
특징
-
Module Features:
1, The control signal voltage range:The trigger signal is low0-2V;High voltage should not exceed5V.
2Using isolation optocoupler, anti-interference ability, stable performance; trigger current only3mA.
3,1-16All on the road can be arbitrary/Closed, or any road.
4,Output format: direct contactAC 220V 10AorDC30V 10ALoad.
5Each relay common terminalCOMAre independent, user-friendly access to different signals, with each relay are normally closed and normally open port.
6, Each relay is equipped with an operation indicator, it pulls off, disconnect off.
7, User-friendly interface design, all interfaces can be a direct connection through the terminal leads, convenient.
8,Features4A fixing bolt hole, easy installation.
9,PCBBoard size:180MM (L) * 80MM (W) * 20MM (H).
Electrical parameters:
Supply voltage: 5V or 12V (DC)Current supply: greater than200mA
Each relay can load:250V 10A (AC) or30V 10A (DC)Product description:
1.To meet the use of the power supply, DC12V;
2.Power requirements wiring diagram, not reverse;
3.ProductsLM2596SBuck chip slight fever, is a normal phenomenon, relay work long hours have normal heating phenomenon, are normal;
4.Load power relay to give the load to leave a margin, should avoid high-power (2000WLeft and right) and long hours of work environment, will have some impact on the life of the product.
문서
- n/a