GNSS L-Band Correction 위치 데이터 리시버 -NEO-D9S
(SparkFun GNSS Correction Data Receiver - NEO-D9S (Qwiic))
개요
- 본 제품은 GNSS L-Band Correction 데이터 리시버 -NEO-D9S입니다.
- L-Band correction broadcast 용 위성 데이터 리시버로 다양한 correction service로 설정하여 사용이 가능합니다. (예, u-blox's PointPerfect satellite GNSS augmentation service)
- 센티미터 레벨의 위치 정확도를 보여주는 제품입니다.
- u-blox u-center를 이용하여 장치 설정이 가능합니다.
특징
- 1x USB Type C Connector
- 2x Qwiic Connectors
- Default I2C Address: 0x43
- Integrated SMA connector for use with L-Band antenna of your choice
- Concurrent reception with L-Band Satellite
- Receives L-Band
- 1525 MHz to 1559 MHz
- Time to First Frame
- <10s @ 2400bps
- User Data Rates
- 600, 1200, 2400, 4800 baud
- Vehicle Dynamics
- Dynamics: +/- 2g acceleration for all data rates (600 bit/s, 1200 bit/s, 2400 bit/s, 4800 bit/s)
- Velocity: Up to and including 300 km/h
- Voltage: 5V or 3.3V but all logic is 3.3V
- Current Consumption (Acquisition & Tracking):
- Peak: 130mA
- Average: 35mA
- Power LED
- Jumpers
- USB Shield
- Power
- 3v3 (for UART2 Port)
- I2C Pull-Up Resistors
- SPI
- Supports UBX protocols over UART or I2C interfaces
- Board Dimensions
- 1.70" x 1.70" (43.2mm x 43.2mm)
-
The SparkFun NEO-D9S GNSS Correction Data Receiver is a satellite data receiver for L-Band correction broadcast. It can be configured for use with a variety of correction services including u-blox's PointPerfect satellite GNSS augmentation service, which provides homogenous coverage in the contiguous USA and Europe. With a clear view of the sky, especially a clear view to the South, it decodes the satellite transmission and outputs a correction stream, enabling a multi-band high-precision GNSS receiver (such as the u-blox ZED-F9P) to reach accuracies down to centimeter-level positioning without needing a separate RTK or NTRIP correction!
The board is equipped with a USB-C connector so you can hook the board to your laptop and configure the device using u-blox u-center if you want to. We've also equipped the breakout board with two Qwiic connectors, so you can connect it quickly and easily to your favorite development board and control it using our sophisticated u-blox GNSS Arduino Library. An SMA connector is included for a secure connection to an L-Band antenna. Power, I2C, UART1, UART2, and SPI are broken out to 0.1" spaced PTH pins. By connecting the NEO-D9S breakout to one of the ZED-F9P's communication ports, you will be able to know where your (or any object's) X, Y, and Z location is to better than an inch, without needing a separate correction source!
Please Note: The u-blox Thingstream PointPerfect Correction Service is currently only available in the USA's 48 contiguous states and in Europe. Please see the PointPerfect Coverage Map and Product Summary for more details. Please keep in mind that u-blox reserves the right to not approve all applicants to this system.
Accessories Required: This product requires a suitable L-Band antenna. Be sure to check out the Hookup Accessories below to pick a suitable antenna for your project.
The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can't hook it up wrong.
문서
-
SparkFun Resources
- Schematic
- Eagle Files
- Board Dimensions
- Hookup Guide
- Building a GPS System
- Arduino Library
- GitHub Hardware Repo
u-blox Resources
- Product Summary
- Datasheet (NEO-D9S-00B)
- NEO-D9S Integration Manual
- NEO-D9S Interface Description
- u-blox Service Terms for B2B Customers
- NEO-D9S and ZED-F9 configuration - SPARTN L-band correction data reception
- u-blox u-center - GNSS evaluation software for Windows
- PointPerfect GNSS augmentation service
- PointPerfect Product Summary
- PointPerfect Service Description
- PointPerfect Service Coverage
- Thingstream IoT service delivery platform
- Thingstream Login
- Thingstream Registration
연관제품
- 연관제품 1