3상 브러쉬리스 DC 모터 드라이버 -TMC6300
(3 Phase Brushless Motor Driver - TMC6300)
개요
- 본 제품은 3상 브러쉬리스 DC 모터 드라이버 -TMC6300입니다.
- 분리된 high side 및 low side 제어로 2A까지의 전류를 제어할 수 있습니다.
- 진단 출력 핀을 가진 과열 및 쇼트 보호기능이 있습니다.
- 2V-11V의 동작접압을 가지고 있어 배터리 전원으로도 회로 동작이 가능합니다.
특징
- Driver IC: TMC6300
- Input Voltage: 2-11V
- Max current: 2A
- Operating current: 7mA
- Standby current: 30nA
- Protection: Thermal shutdown, short circuit shutdown
-
The TMC6300 from Trinamic is a powerful, yet easy to use three phase brushless DC (BLDC) motor driver. Separate high side and low side controls allow for incredible control up to 2A of current. The driver is temperature and short circuit protected with a diagnostic output pin to indicate system issues. With an operating voltage down to 2V, the TMC6300 is suitable for battery powered designs.
We've designed an innovative two-sided, four-layer breakout board to make hookup as easy as possible. The board is mounted with LEDs and labels facing up, IC down. This allows the thermal pad on the board to be access if cooling is required.
Controlling three-phase BLDC motors is not trivial. This board requires six PWM signals to fully control one motor. We've found the Arduino Simple Field Oriented Control library to be very good. The open loop example combined with the six-channel PWM method and every PWM pin on the Arduino Uno gets this board working. Note the pairs of PWM pins that must be used.
This board was designed to control our three-phase Brushless Gimbal Stabilizer Motor but can be used with any 3-phase motor up to 2A.
문서
연관제품
- 연관제품 1