정교 각 센서 -AAS33001
(ANGLE 9 CLICK)
개요
- 본 제품은 정교 각 센서 -AAS33001입니다.
- 0-360도 각 위치를 측정할 수 있는 AAS33001 센서를 기반으로 디자인되었습니다.
- ABI (incremental output interface) 및 UVW(motor commutation) 도 지원합니다.
특징
-
HOW DOES IT WORK?
Angle 9 Click is based on the AAS33001, a precision angle sensor with incremental and motor commutation outputs and on-chip linearization from Allegro Microsystems. It is a rotary position circular vertical Hall-sensor-based device (CVH), incorporating one electrically independent Hall sensor die, thus providing solid-state consistency and reliability. The Hall sensor measures the magnetic field vector through a 360° in the x-y plane parallel to the face of the angle sensor. The Hall sensor also computes an angle measurement based on the actual physical reading and internal parameters that the user has set.
The Angle 9 Click can monitor the angular position of a rotating magnet at speeds ranging from 0 up to 15,000 RPM with a refresh rate of 1μs. For testing purposes, this Click board™ can be used with a rotary magnetic holder, which is sold separately. It is a unique addition that can be used alongside a precision angle sensor allowing fast prototyping and quick measurement during development. This magnetic holder is an adjustable shaft with a 6mm diameter magnet that can be positioned right above the angle sensor.
The Ange 9 Click also has a header that allows you to use it with additional devices over the ABI and UVW interfaces. Both interfaces use all three pins (A/U, B/V, I/W), so you can't use both at the same time. The Incremental Output Interface (ABI) is available in the form of quadrature A/B and Index outputs to emulate an optical or mechanical encoder. The brushless DC motor output is available over the U, V, and W signals for stator commutation of brushless DC (BLDC). The device is mode-selectable for 1 to 16 pole pairs. PWM output is always resolved to a 12-bit angle resolution. The external power supply can be selected over the VCC SEL jumper with 5V from the mikroBUS™ socket chosen by default. The external power supply can range from 3.7 to 18V and be connected over the header terminal.
Angle 9 Click uses a full-duplex standard 4-Wire SPI serial interface to communicate with the host MCU, using SPI mode 3 and supporting frequencies up to 10MHz. The readout is possible with a 12-bit resolution with error flags or a 15-bit resolution without error flags. The angle sensor can be reset over the RST pin. The PWM interface over the PWM pin provides the initial position for ABI/UVW interfaces.
This Click board™ can only be operated with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. This Click board™ comes equipped with a library containing functions and an example code that can be used as a reference for further development.
SPECIFICATIONS
Type Magnetic Applications Can be used for the development of contactless potentiometers, contactless knobs, RC servos, and other angular position measurement solutions On-board modules AAS33001 - a precision angle sensor with incremental and motor commutation outputs and on-chip linearization from Allegro Microsystems Key Features Contactless angle measurement, highest reliability, and durability, high-resolution output signal, allows adding rotary magnetic holder for fast prototyping, and fast measurement during the development process, incremental output interface, motor commutation interface, external power supply, and more Interface SPI ClickID Yes Compatibility mikroBUS Click board size M (42.9 x 25.4 mm) Input Voltage 3.3V,5V,External Angle 9 Click is a compact add-on board that detects the absolute position of a permanent magnet. This board features the AAS33001, a precision angle sensor with incremental and motor commutation outputs and on-chip linearization from Allegro Microsystems. It is a contactless angle sensor for 0° to 360° angular position, rotation speed, and directional measurement. Support for incremental output interface (ABI) and motor commutation (UVW) is also available. The same goes for the on-chip EEPROM for storing factory and customer calibration parameters. This Click board™ makes the perfect solution for the development of contactless potentiometers, contactless knobs, RC servos, and other angular position measurement solutions.