DFrduino 이더넷 쉴드
(DFRduino Ethernet Shield V2.1
(Support Mega and Micro SD))
개요
- 본 제품은 DFRduino 이더넷 쉴드 V2.1로 아두이노가 인터넷에 접속할 수 있게 합니다.
- Wiznet W5100 이더넷 칩을 장착하여 TCP/UDP 및 동시에 4개의 소켓 연결을 지원합니다.
- 아두이노사의 이더넷 쉴드와 호환되며, 아두이노의 공식 이더넷 라이브러리를 이욯하여 본 제품을 제어할 수 있습니다.
- 또한 아두이노 메가 2560과도 사용이 가능하며 micro SD 카드 슬롯이 장착되어 있습니다.
- 본 제품에는 적재가능 헤더가 장착되어 있어 아두이노 헤더에 본 쉴드를 연결하여 사용이 가능합니다.
- 아두이노와 이더넷 쉴드간은 SPI로 통신(핀 10, 11, 12, 13)하여 이더넷 쉴드 장착시 이 4개의 핀은 GPIO로 사용할 수 없습니다.
- 쉴드에는 RJ45 이더넷 커넥터가 장착되어 있으며, 리셋버튼을 누를시 아두이노와 이더넷 쉴드가 둘다 리셋됩니다.
- 쉴드에는 다음과 같은 LED가 장착되어 있습니다.
- PWR: indicates that the board and shield are powered
- LINK: indicates the presence of a network link and flashes when the shield transmits or receives data
- FULLD: indicates that the network connection is full duplex
- 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s)
- RX: flashes when the shield receives data
- TX: flashes when the shield sends data
- COLL: flashes when network collisions are detected
호환기기
- Arduino Mega 1280/2560
- Arduino UNO
- Arduino Dumlinove
문서
연관제품
- 연관제품 1