네오픽셀 RGB LED 스트립 30 LED -1m 검정
(Adafruit NeoPixel Digital RGB LED Strip
- Black 30 LED - 1m - BLACK)
개요
- 본 제품은 30개의 개별적으로 제어가 가능한 RGB LED를 장착한 네오픽셀 스트립입니다.
- 검정색을 가진 유연한 PCB 1미터 위에 30개의 RGB LED가 장착되어 있습니다.
- 8비트 PWM을 이용하여 빨강, 초록, 파랑 색을 제어가 가능하여 픽셀당 24비트 컬러의 제어가 가능합니다.
- LED는 위아래로 체인식으로 연결된 쉬프트 레지스터에 의해 제어되기 때문에 스트립을 짧게 하거나 늘려서 사용이 가능합니다.
- 데이터를 보내는데 단 하나의 핀만 필요합니다.
- PWM은 각각의 LED 칩에 내장되어 있기 때문에 색을 한번 셋팅하면, LED 스트립에 신호를 보내지 않아도 모든 LED가 계속 빛이 나게 됩니다.
- LED가 30개 장착 장착되어 있기 때문에 9.5W가량(2A@5V)이 필요할 수 있습니다.
- LED 드라이버는 timing-specific protocol을 사용하기 때문에 8Mhz이상의 아두이노 우노/메가와 같은 실시간 마이크로컨트롤러와 사용하여야 합니다. 인터프리터 기반의 마이크로컨트롤러와는 동작하지 않습니다.
- 알림: 6V이상의 전원을 절대로 사용하지 마십시오. LED 전체가 손상될 수 있습니다.
특징
- 12.5mm (0.5") wide, 4mm (0.16") thick with casing on, 1.85mm (0.07") thick without casing, 33mm (1.3") long per segment
- 30 LEDs per meter
- Removable IP65 weatherproof casing
- Maximum 5V @ 60mA draw per 1.3" strip segment (all LEDs on full brightness)
- 5VDC power requirement (do not exceed 6VDC) - no polarity protection
- 1 integrated RGB LEDs per segment, individually controllable
- LED wavelengths: 630nm/530nm/475nm
- Connector: 2-pin JST SM
- We currently ship this product with the WS2812B 4-pin chip LED installed. Previous versions may have come with the WS2812S 6-pin LED. Both B and S LEDs can be chained together and are compatible with the NeoPixel Libary. The 'B chip type adds additional polarity protection and is the same brightness as the 'S type.
문서
- Adafruit NeoPixel Überguide
- Using NeoPixels with Netduino Plus 2
- Larson Scanner Shades (Trinket-Powered NeoPixel LED Strip Glasses)
- NeoPixel Cyber Falls Wig
- Flora+NeoPixel LED Skateboard Upgrade
- WiFi Controlled LED Christmahanukwanzaa Tree
- 1,500 NeoPixel LED Curtain with Raspberry Pi and Fadecandy
- Trinket NeoPixel LED Longboard
- NeoPixels on Raspberry Pi
- The PICsellator
- Multi-tasking the Arduino - Part 3
- Our detailed NeoPixel Uberguide has everything you need to use NeoPixels in any shape and size. Including ready-to-go library & example code for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo, Trinket/Gemma, Arduino Due & Arduino Mega/ADK (all versions)