모노크롬 128x32 I2C OLED 그래픽 디스플레이
(Monochrome 128x32 I2C OLED graphic display)
개요
- 본 제품은 약 1인치의 작은 OLED 디스플레이입니다.
- 128x32 해상도의 흰색 OLED 픽셀을 가지고 있으며, 각각의 픽셀은 컨트롤러에 의해 on/off 제어가 가능합니다.
- OLED는 자체적으로 발광하기 때문에 백라이트가 필요하지 않아 전력을 절약 할 수 있으며, 높은 contrast를 가집니다.
- 모듈에 장착된 드라이버 칩은 SSD1306이며, OLED는 3.3V 전원 및 로직으로 동작하지만 모듈에 레벨쉬프터가 장착되어 있어 5V 장치에서도 사용이 가능합니다.
- I2C인터페이스를 통해 통신합니다.
- 3.3V 전원에서 약 20mA가량을 소비합니다.
- 문서 섹션의 아두이노 라이브러리 및 예제 코드를 참고하십시오.
- 마이크로컨트롤러는 화면을 버퍼링하기 위해 512byte 램 이상이 있어야 합니다.
특징
-
Dimensions:
- PCB: 20mm x 35mm (0.8" x 1.4")
- Display area: 7mm x 25mm
- Thickness: 4mm
Display details:
- Diagonal Screen Size:0.91"
- Number of Pixels:128 × 32
- Color Depth:Monochrome (White)
- Module Construction:COG
- Module Size (mm):46.30× 11.50 × 1.45
- Panel Size (mm):30.00 × 11.50 × 1.45
- Active Area (mm):22.384 × 5.584
- Pixel Pitch (mm):0.175 × 0.175
- Pixel Size (mm):0.159 × 0.159
- Duty:1/32
- Brightness ( cd/m2):150 (Typ) @ 7.25V
- Interface:I2C
- Display current draw is completely dependent on your usage: each OLED LED draws current when on so the more pixels you have lit, the more current is used. They tend to draw ~15mA or so in practice but for precise numbers you must measure the current in your usage circuit.
- This board/chip uses I2C 7-bit address 0x3C
문서
- Monochrome OLED Breakouts
- Smart Measuring Cup
- SSD1306 OLED Displays with Raspberry Pi and BeagleBone Black
- Adafruit FT232H With SPI & I2C Devices
- We have a detailed tutorial and example code in the form of an Arduino library for text and graphics.
- You can download our SSD1306 OLED display Arduino library from github which comes with example code.
- OLED PCB files
- UG-2832HSWEG02 Datasheet
- SSD1306 Datasheet