1.3인치 샤프 메모리 디스플레이 모듈 -96x96, silver
(SHARP Memory Display Breakout
- 1.3" 96x96 Silver Monochrome)
개요
- 본 제품은 1.3인치 샤프 메모리 LCD 디스플레이로 eInk(e-paper) 디스플레이와 LCD의 장점을 모은 제품입니다.
- 초저전력 eInk와 빠른 refresh rate의 LCD를 가지고 있는 제품입니다.
- 백라이트가 없기 때문에 어두운 곳에서는 외부 조명이 필요합니다.
- 디스플레이는 3V 전원 및 3V 로직으로 동작합니다.
- 4개의 마운팅 홀이 있습니다.
- 본 디스플레이는 'write only' 제품으로 데이터를 보내는데 3핀개의 핀만이 필요합니다. 하지만 write only 디스플레이(96x96 bits = 1,152bytes)는 마이크로컨트롤러 드라이버에 의해 반드시 버퍼링 되어야 하기 때문에 SD 인터페이스와 같은 RAM을 많이 쓰는 라이브러리와는 같이 동작하지 않을 수 있습니다.
-
특징
- Datasheet for the LS013B4DN04
- Display dimensions (viewable): 24.192mm (H) × 24.192mm (V)
- Dot pitch): 0.252 (H) × 0.252 (V)
- Display size: 3.4cm / 1.3" diagonal
- Current draw depends on refresh rate: with 1Hz data refresh, its 12uW (4uA @ 3.3V)
- PCB Dimensions: 39.96mm / 1.57" x 39.6mm / 1.55" x 4.84mm / 0.19"
- Weight: 7.94g
문서
- Adafruit Sharp Memory Display Breakout
- Solder the included header to the display and connect Vin to 3-5V, GND to ground, and SCK, DI and CS to three Arduino pins. Then download and install our SHARP Memory Display library and the Adafruit GFX library.