ADXL345 3축 가속도 센서
- +/-2g/4g/8g/16g, I2C/SPI
(ADXL345 - Triple-Axis Accelerometer
(+-2g/4g/8g/16g) w/ I2C/SPI)
개요
- 본 제품은 아날로그 디바이스사의 ADXL345를 탑재한 3축 가속도 센서입니다.
- I2C 및 SPI인터페이스를 가지고 있으며, 보드상에 3.3V 레귤레이터 및 로직변환 회로를 가지고 있어 3V 혹은 5V 마이크로컨트롤러와도 사용이 가능합니다.
- X, Y, Z 3축을 측정하며 감도 레벨을 +-2g, +-4g, +-8g, +-16g 중에 하나로 설정할 수 있습니다.
- 낮은 범위는 천천히 움직는 것에 대해 좀더 높은 분해능을 제공할 수 있으며, 높은 범위는 빠른 물체를 트랙킹하는데 좋습니다.
-
특징
- Length:25mm/0.95in
- Width:19mm/0.75in
- Height:3.14mm/0.12in
- Weight:1.27g/0.04oz
- This board/chip uses I2C 7-bit address 0x53.
문서
- ADXL345 webpage for datasheets and more
- ADXL345 Digital Accelerometer
- Get started in a jiffy with the Adafruit Arduino library for the ADXL345! Simply connect the VIN pin to 3-5V power, GND to ground, SCL to I2C clock (also known as A5 on an UNO), SDA to I2C data (aka A4 on UNO). Then download the library and uncompress it. Rename the folder inside Adafruit_ADXL345 and check it contains a .cpp and .h file. Place the folder into your Arduino libraries folder. Check out our tutorial about libraries if its your first library installation.