12인치 체미컬 eTape 수위레벨 센서 -테프론 자켓
(12 inch Chemical eTape Liquid Level Sensor
with Teflon Jacket)
개요
- 본 제품은 12인치 체미컬 eTape 수위 레벨 센서입니다.
- 수위에 따라 가변적으로 변하는 저항값을 가지고 있는 센서입니다.
- 본 센서는 테프론 자켓을 가지고 있어 센서를 화학적 환경이나, 페트롤륨, 음식물 보호 어플리케이션에 사용할 수 있습니다.
- 수위가 높을수록 저항은 낮으며, 수위가 낮을수록 높은 저항값을 가집니다.
- 센서는 저항이므로 voltage divider 회로를 구성하여 쉽게 마이크로컨트롤러의 ADC 핀으로 값을 읽을 수 있습니다.
- 센서는 4핀으로, 꼽아서 사용할 수 있는 4핀 커넥터와 voltage divider 구성시 사용 가능한 560ohm 저항을 포함하고 있습니다.
특징
- 305mm x 25mm / 12" x 1"
- Weight: 5g
- Sensor Length: 361mm / 14.2"
- Thickness: 0.38mm / 0.02"
- Tech Specs:
- Sensor Output: 400-2000Ω ±20%
- Ref. Resistance: 2000Ω ±20%
- Actuation Depth: Nominal 25.4mm / 1"
- Resistance Gradient: 60Ω/cm / 150Ω /inch
- Power Rating: 0.5 Watts
- Temperature Range: 15°F - 150°F / -9°C - 65°C
문서
- Connect pin #2 of the sensor to ground, then pin #3 to a 560 ohm resistor. The other side of the 560 ohm resistor to VCC (3.3V or 5V for example) to create a resistor divider. The ADC pin connects to the point between the resistor and sensor.
// the value of the 'other' resistor #define SERIESRESISTOR 560 // What pin to connect the sensor to #define SENSORPIN A0 void setup(void) { Serial.begin(9600); } void loop(void) { float reading; reading = analogRead(SENSORPIN); Serial.print("Analog reading "); Serial.println(reading); // convert the value to resistance reading = (1023 / reading) - 1; reading = SERIESRESISTOR / reading; Serial.print("Sensor resistance "); Serial.println(reading); delay(1000); }