3.5 인치 라즈베리파이 프라이머리 디스플레이 -터치지원
(3.5 inch Primary Display for the Raspberry Pi)
개요
- 알림: 구매대행 제품입니다 (개인별 1개 가능)
- 본 4DPi-35 제품은 3.5인치 480x320 해상도의 라즈베리 파이용 프라이머리 디스플레이입니다.
- 라즈베리 파이의 위에 꼽아 마치 모니터가 연결된 것 처럼 HDMI나 Composite 출력으로 보내지는 화면을 출력합니다.
- 감압식 터치 패널을 지원하여 마우스 없이 라즈베리 파이의 기능을 실행할 수 있습니다.
- 4DPi-35와 라즈베리 파이는 고속 48Mhz SPI 연결을 통해 인터페이스되며, 이는 보드상의 프로세서가 다이렉트 명령 해석, SPI 통신 압축, 커스터마이제이션된 DMA enabled 커널을 통해 가능하게 되었습니다.
- 4DPi-35는 라즈베리 파이 OS와 동작되도록 디자인 되었습니다.
- 핀 헤더가 지원되어 디스플레이가 연결된 상태에서도 점퍼 와이어나 IDC 리본 케이블을 이용하여 라즈베리 파이의 GPIO 핀을 접근할 수 있습니다.
- 라즈베리 파이 2, A,B,A+,B+와 호환됩니다.
- 알림: 40핀 커넥터 장착되어 출고됩니다. 다른 핀은 장착되어 있지 않습니다.
특징
- Universal 3.5” Primary Display for the Raspberry Pi.
- Compatible with Raspberry Pi A, B, A+, B+ and Pi2 versions.
- 480x320 QVGA Resolution, RGB 65K true to life colours, TFT Screen with integrated 4-wire Resistive Touch Panel.
- Display full GUI output / primary output, just like a monitor connected to the Raspberry Pi
- High Speed 48Mhz SPI connection to the Raspberry Pi, featuring SPI compression technology.
- Powered directly off the Raspberry Pi, no external power supply is required.
- Typical frame rate of 17FPS. Higher if image is able to be compressed by Kernel.
- On/Off or PWM controlled backlight, selectable by on board jumper.
- Module dimensions: 57 x 86 x 21mm (including corner plates). Weighing ~ 53g.
- Display Viewing Area: 49 x 73.4mm
- 4x corner plates with 2.6mm holes for mechanical mounting.
- RoHS and CE Compliant.
-
This item includes the following:
- 4DPi-35 3.5" Display Module
- Quick Start Guide